9013 comments found.
Dear FilterEverything Support Team,
We’ve encountered an issue with the plugin: all previously configured filters are no longer visible on the site. We had already entered and saved all filter settings, but now everything appears to be missing.
Could you please assist us in restoring the filters or advise us on what might have caused this issue?
Thank you in advance for your support.
Best regards
Hi sara861
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Also, please send the link to the filter set and the link to the page where this filter set was displayed previously, so we can check it.
Best Regards,
Victor
Hi,
I’m using the paid version of the Filter Everything plugin on my WordPress eCommerce site, but I’m experiencing an issue — the filter does not appear on the page.
My goal is to filter cartons and boxes by Width, Length, and Height using custom fields. The page where I’m trying to implement the filter is built with Elementor using a loop post widget that filters by category. I also have separate category landing pages.
Please see below links and screenshots for reference.
Category landing page : https://packrite.mishacontent.com/product-category/packaging/cartons-boxes/?v=322b26af01d5)
Custom Elemento page: https://packrite.mishacontent.com/cartoons-and-boxes/?v=322b26af01d5
Screenshots: https://packrite.mishacontent.com/wp-content/uploads/2025/05/Filter-everything-scaled.jpg
Looking forward to your assistance.
Best regards, Yuliia
Hi Yuliia
Thank you for choosing Filter Everything PRO.
The pages that you send are product category taxonomy pages. In the “Where to filter” you have to choose “Product Category” + “Any Category(if Archive pages using the main query) or “Exact category name”(if each page uses a unique custom query”)
Best Regards,
Victor
Hi Viktor,
Thank you for your prompt response. I’ve tested the solution you suggested on a product category taxonomy page. I also tried selecting the specific page directly in the “Where to filter” field while using Elementor to build the landing page—but unfortunately, there’s still no result. Please let me know if there’s anything else I should try or check. Since All the integration seem to be correct.
Best regards, Yuliia
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Best Regards,
Victor
Thank you. Just added you to the wp-admin and have sent the message
Hi Yuliia
We have checked this page – https://packrite.mishacontent.com/cartoons-and-boxes/?v=322b26af01d5 and it is working, however, you need to find the reason why this addition is appearing on the site URL ?v=322b26af01d5 and remove it completely, as it is causing some issues with the filtering.
Best Regards,
Victor
Big Thank you, Victor!
Hey there. I have created a new page with a loop grid, and I’ve made a filter set to work with it. It appears to detect it in the back-end as it allows me to add all of my filter criteria, select “Property query” from what to filter, but only the sorting field is present on the page. The page in question is https://kormendytrott.com/property-search/
Thanks,
Adrian
Hi Adrian
Thank you for choosing Filter Everything PRO.
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Best Regards,
Victor
I am using the SearchWP plugin for search and am running into a problem with the filters. When I do a search, the results page shows the filters with selections already made. I can’t completely clear the filters to show all posts because it’s stuck on the search term. The filters also do not appear to be affecting the results from the search. It’s almost as if the filters are filtering data that is not being presented.
Hi adama212
Please send the link to the exact page with the described issue so we can check it.
Best Regards,
Victor
I purchased this at the request of my Web Hosting Company Texas Technologies Group ( “Customer Service” cs@texastechnologygroup.com ) and they are saying that the Purchase Code is Not working for the Activation Key Sold To J&B Enterprises, Jessie D. McCulley (jessiedon0515@gmail.com) Or ( jessie@jb-guns-ammo.com ) Item URL: https://codecanyon.net/item/filter-everything-wordpress-woocommerce-filter/31634508 ~ Item ID: 31634508 Item Purchase Code: e8319d82-dae2-4536-a714-7318cd04dbdc Purchase Date: 2025-04-04 15:16:48 UTC Appreciate your attention in this matter and look forward to your forthcoming reply ~ I was also trying to figure out what My Password was on my Login account (Jessiedon0515) or how that change it but can seem to figure that out ~ Thanks
Hi jessiedon0515
Thank you for choosing Filter Everything PRO.
It is important to keep in mind that the License key and CodeCanyon purchase code are two different things.
Please use incognito mode in your browser!!!
In order to set the License key for the Filter Everything PRO plugin, simply head to Filters -> Settings -> License and click the “Get your License Key” button.
It will take you to a new page where you have to log in with your Envato credentials (with an account where you have purchased the plugin) and obtain your License key.
Best Regards,
Victor
Dear Stepasyuk,
I just purchased Filter Everything PRO with the expectation that I would be able to use range sliders to filter WooCommerce product attributes such as Noise level (in dB) and Power (in Watt), which are stored as numeric values.
However, I’ve noticed that range filtering seems to be available only for custom fields (meta fields), not for standard WooCommerce attributes.
Since I have already entered a large number of these numeric values as product attributes, I would greatly appreciate your advice:
Is there a way to enable range filtering for numeric product attributes
Looking forward to your response. Thank you in advance!
Best regards, Adrian Geiger
Hi Adrian
Thank you for choosing Filter Everything PRO.
Choose the “Taxonomy Numeric” option in the “Filter By” – https://prnt.sc/W1IEZR7qiRlR then choose the required attribute.
Best Regards,
Victor
Hi Victor,
thanks a lot. This was exactly what I was looking for.
Best Regards, Adrian
I have a total of 6 main categories. Each main category contains multiple subcategories. I would like a filter that allows users to select on all subcategories, regardless of the main category they fall under. In short: I want visitors to have the ability to freely filter by any attribute within the whole, both at the main and sub-level.
Can you please help me?
Hi nwb18
In the reference, there are three filters implemented in the text. You can do the same; however, you can only create one filter per entity. For example, if you’re using a category, you can create only one filter from it. You cannot create three separate filters from the category taxonomy. So, to have three filters, you need to use three separate taxonomies or custom fields.
Then create 3 filter sets, apply them to the same page, and use 3 shortcodes [fe_widget]
Best Regards,
Victor
Hi Victor, I’m a lot further along, but it’s not working yet. There is a filter, there are images to be filtered. But the filter does not work. Can you help with this?
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Also, please send the link to the page where you want to filter your posts.
Best Regards,
Victor
I have sent the credentials 
Hmm, it actually is filtering – https://prnt.sc/dcTFuZn0eQDH or is there something wrong?
Best Regards,
Victor
Odd, but oké
Can I ask you something else. I added a in the CPT UI a post and taxonomy. In de post are Character Strengths divided into groups. Can you make the groups more visible as main groups with the filter?
Yes, you can do it, but only with checkboxes. Go to the filter set > navigate to your filter > click “more options” > from there choose the “hierarchy view” option and click the update button in the filter set.
Best Regards,
Victor
Hi Victor, one more question. I know there has to be a ‘all’ button under show more. But strangely enough its not there..unless I really need new glasses.
Or better yet, can it be a button to ‘remove all filters’
Hi nwb18
There are no such buttons, or filter terms named “All”. What you can do is add a Chips widget for filter resetting purposes – https://filtereverything.pro/resources/chips-widget/ or its shortcode, you can find all of the shortcodes here – https://filtereverything.pro/resources/shortcodes/
Best Regards,
Victor
Hello,
I’ve just purchased your plugin for my website, www.myfiesta.it, and I need to set up search filters for some categories I’ve created. In the main “Red Wines” category (https://myfiesta.it/vini-rossi/), I need to display the main category “Red Wines” followed by “Winery Wines” (with all the subcategories belonging to “wineries,” meaning all wineries listed in that category), and then “Region Wines” (with all the regions listed in the “Region Wines” category).
Consequently, when a customer clicks on a red wine from the Sicily region, they should see all red wines belonging to Sicily. The same applies if they want to see all red wines from a particular winery. How can I achieve this?
Hi myfiestanalytics
Thank you for choosing Filter Everything PRO.
All you can do is turn on the hierarchy view for the category filter to make it work like here – https://demo.filtereverything.pro/posts/
Go to the filter set > navigate to the category filter > click “more option” and from there turn on the hierarchy view > hit the update button in the filter set to apply changes.
Best Regards,
Victor
Hello Victor,
Unfortunately, this plugin isn’t suitable for my needs as I require different features. I would like to request a refund and uninstall the plugin. How can I proceed with this?
Thank you
Hi myfiestanalytics
We are sorry to hear that.
In general, a refund is possible by submitting a form through the account where the plugin was purchased and waiting for a response. Please note that the support team does not handle refunds. Furthermore, we have no control over the refund team and cannot speed up the process or influence it in any way.
Best Regards,
Victor
Hi there,
First of all, thank you for your great plugin.
I’ve installed Filter Everything Pro on my WordPress Multisite setup, and I’m using it primarily on a subdomain that runs Elementor Pro.
Unfortunately, I noticed that the filter widget is not showing up in the Elementor widgets panel (the left sidebar). However, when I manually insert the shortcode [fe_widget], it does display correctly and functions as expected.
Still, I would really need the widget to appear visually in the Elementor sidebar in order to manage layout more efficiently.
Could you please let me know how to make the widget appear properly in the Elementor editor, or if there’s something I might have missed during installation?
Thanks in advance for your support!
Best regards, Moreno
Hi Moreno
Thank you for choosing Filter Everything PRO.
You can find the Filters widget in the “WordPress” section in Elementor. Please note that it won’t appear in search results. The widget is named “Filter Everything – Filters.” However, while editing the page template in Elementor, it will appear as plain text. The filter will be visible only on the front end of the page.
Best Regards,
Victor
Hello,
there is an issue with filter translation via WPML. I followed the instructions in the documentation and created the filter, which works fine for most of the terms, but 3 translated text attributes are not displaying at all. The difference is that missing filters are text filters and the correctly working are numeric or are in English. What should I do?
screenshots: GEO filter valid: https://ibb.co/8g9mW1TD ENG filter missing: https://ibb.co/6JbZKv2R Filter in filter set GEO: https://ibb.co/NdpZp2Gd Filter in filter set ENG: https://ibb.co/jkwjXhHF Taxonomy translation: https://ibb.co/5hqXsQzZ
Regards
Hi metromart99
Thank you for choosing Filter Everything PRO.
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Also, please send the link to the page in ENG where it is working and in another language where it is not working.
Best Regards,
Victor
Hello,
thank you for a rapid response. Credentials sent.
Regards
Every time we try to log in we get this issue – https://prnt.sc/PnVRUEnbah-u
Best Regards,
Victor
Query monitor just crashed the frontend, uninstalled sorry. I hope you don’t need it very much. Backups are server side, if you don’t need the backup tool for yourself, you have my full and public permission to destroy everything
Looks like there’s an issue with those attributes. Can you set up the staging site so we can edit it as needed for testing purposes without worrying about anything going wrong?
Since we need to deactivate plugins and so on, it might be better to do it on the staging site even if you have a backup.
Best Regards,
Victor
staging created. Login details sent using the link you provided previously
Hi metromart99
Thank you for that. For some reason, the login page was loading incredibly slowly. After we logged in, after some more loading we got this: https://prnt.sc/SUBvw_76H8S2
Do you think you can check it so we can get access normally?
Update, seems like it is working now. However it is not stable (stop working from time to time)
Best Regards,
Victor
I added a security certificate on it so Cloudflare is less protective. Please check.
Regards
Let’s start with the implementation. You have two languages on the site, however, it is still displaying all of the products from the Georgian language on the EN language pages, which is one of the issues, as you have only 1 EN product, and only that one product should be displayed in EN language. (Not mixed En + Georgian)
Secondly, we created a custom attribute for testing purposes, and added it to that one product that has EN translation, and here are the results:
https://staging.metromarti.ge/კატეგორია/sayofackhovrebo-teqnika/sareckhi-manqanebi/fe_test_prdo-gr_fe_att_something/And the EN
https://staging.metromarti.ge/en/product-category/home-appliances/washing-machines/fe_test_prdo-en_fe_att_1/
Everything seems to be working well, so it’s more likely that the issue lies in the specific attributes you’ve created, possibly in their slugs. Using repetitive slugs like wc-something-something and wc-something-something1 may not be perfect due to how slugs are parsed. A better approach would be to use underscores (e.g., wc_something), which treat the slug as a single phrase and ensure it remains unique.
Also, if they were imported it can be also an issue, with the broken data in the database that should be checked.
Try to fix first things, then create new attributes, and then work with the filtering by those attributes to check if everything is working correctly.
Best Regards,
Victor
OK, thanks for your investigation and for the insights. Unfortunately, I won’t be able to avoid importing the attributes, since there will be hundreds of them. Nevertheless, I will use the underscore as you recommended. I will also try to translate some more products to see if this ads values to the text filters.
Greetings,
after translating some of the products, the attributes in the filter started to show up gradually. Is there a way to override that behavior and display the untranslated strings if not available? Or is it WMPL’s settings in affect?
Hi metromart99
This is a highly technical question. We’ll direct it to the development team to confirm how it works. Once we receive the information, we’ll let you know right away.
Best Regards,
Victor
Hello Victor, I’m writing to follow up on my question from a few days ago. I’m still awaiting an update from the development team regarding the possibility of displaying untranslated attribute values as a fallback. In the meantime, I have continued to work on the site, and the problems with filter translations persist and have become more complex. I believe there is a gap in the documentation regarding the specific, step-by-step process for translating a Filter Set with WPML, which is causing these issues. To help your team understand the problems and guide me toward a solution, could you please clarify the correct workflow by answering the following questions?
1. Initial Creation: Should a Filter Set always be created in the site’s default language (Georgian) first? Or is it also valid to create it in the secondary language (English) and then translate it to the primary?
2. Standard Translation: When using WPML’s standard translation interface for a Filter Set, it only offers fields for “Title,” “Excerpt,” and “URL.” This is clearly not enough to translate the filter’s functionality. What is the intended next step after this to sync the actual filter criteria (e.g., price, taxonomies, attributes)?
3. Duplicating for Translation: Is the intended method to “Duplicate” the Filter Set for the other language and then edit that copy independently? When I tried this, it created an empty Filter Set in the second language; none of the original filters (price, brand, attributes) were copied over, forcing me to rebuild it from scratch. Is this the expected behavior?
4. Applying to Sub-categories: How can a single Filter Set be configured to apply to a parent category and all of its sub-categories automatically, without having to specify each one?
5. Cloning a Filter Set: Separately from translation, is there a way to clone an existing Filter Set as a template for a new one? This would save a significant amount of time when creating similar filters for different categories. ~ To give you a practical example of the issues, I have two categories set up with filters that are behaving differently:
Case 1: “Washing Machines” Category Setup: Some products are translated into English, but not all. The attributes themselves are all translated via WPML. The Filter Set was created in the primary language first. Problem: The filter only displays attribute values that exist on the few products that have been manually translated. The attributes are all translated. The filters are doubled in both English and Georgian in backend.
Case 2: “TVs” Category Setup: ALL products in this category are translated. The Filter Set was created in the secondary language (English) first, then duplicated for the primary language (Georgian), and the Georgian version was built from scratch while keeping the WPML link. Problem: Even with all products and attributes translated, the filter is incomplete. For example, numeric attributes like “Frequency (Hz)” (ეკრანის სიხშირე) and text attributes like “Resolution” (რეზოლუცია) are not displaying all of their available values in the filter on the front-end.
My primary goal is to understand the correct, repeatable process for translating Filter Sets with WPML. A detailed walkthrough or answers to my questions above would be immensely helpful.
Thank you for your continued support. Regards
Hi metromart99
Currently, it only works with translated terms. So if you have a page in lang1 that also displays products without translations from lang2, only the attributes from lang1 will be shown in the filter set.
1) You can create a filter set in any language; just make sure to place it on the appropriate page. For example, you can create a filter set for lang1 and assign it to page1, then create a filter set for lang2 and also assign it to page1. When you switch languages on that page, the corresponding filter set will be displayed.
2) Switch to the WordPress translation method. The one from the WPML have no effect at all in terms of filter translation.
3) Please send us the exact two links to those pages so we can check why one of them is empty and how you placed the filter set in the language where it appears empty. (link to the page where they are displayed and the link where they are not)
4) Not possible, each category page is a separate page, so it requires separate filter sets for each page.
5) This feature is already developed and currently in testing. It will be released soon, either this week or next week.
Best Regards,
Victor
hello,
thank you for your response. The links from “Case 2” below, where the secondary language (English) only displays a fraction of available attribute terms.
”/televizorebi/” – Georgian; and ”/en/tv/” – English
All terms and products are translated for this category. Please take a look at the following filters (missing translated values): რეზოლუცია – Resolution, and ეკრანის სიხშირე (Hz) – Frequency
Counts on the displayed values in Secondary are also incorrect.
Regards
Hmm, according to the attributes appliance everything is displayed correctly(staging site):
1) Here is for the Georgian language https://prnt.sc/X7mhjp2IySqj which has a lot of applied terms to your products
2) Here is EN language: https://prnt.sc/xAIbEc512Deg which has like 5 products with applied attributes to them.
Best Regards,
Victor
oh wow. Thank you for the hints and for your time.
I am happy you’re going to add duplication of filter sets. Please also consider the inheriting feature, to the lower branches of the same hierarchy, for future. It’s also very useful.
Regards
There are plans for this feature; however, it is significantly more complex to implement. It would require rewriting a significant amount of the code, including core functionality, to ensure it works correctly with subpages and taxonomies. Additionally, it would need functionality to prevent this behavior as well, since some users may find it unsuitable for their use cases. That said, it is on the list for future features.
Best Regards,
Victor
Hi there,
previously in this threat you recommended me to “2) Switch to the WordPress translation method. The one from the WPML have no effect at all in terms of filter translation.”
I did, but neither on duplicate nor on translate (WordPress) option I am able to make it work. I tried both: “Copy content from Georgian” and “Overwrite with Georgian”.
The filter set I am trying to translate is: “მობილური ტელეფონები”
Could you please help?
Regards.
Hi metromart99
Please send the following information:
1) A link to the page in the language where it is working.
2) A link to the page where the translated version should appear.
3) Credentials to the wp-admin dashboard following this document so we can check it.
One more thing: if you send us the credentials, please mention it in the comments section. That way, we won’t be confused or miss the fact that you’ve already provided them.
Best Regards,
Victor
hi,
1) /mobiluri-telefonebi/ 2) /en/mobile-phones/ 3) Done!
Noted!
Regards
Hi metromart99
Here’s the process create one filter set for language 1 and apply it on the required page. Go to another language and create the same filter set for the same page with the required titles for language 2.
You need to manually create two same filter sets, one for EN second for GE.
This is EN: https://prnt.sc/H8J_tAPAFCmm and this is GE: https://prnt.sc/-8F157BfRGsJ
Results: EN page – https://prnt.sc/YGzWvGtPJZjo and GE – https://prnt.sc/WIBzcqK9qW2i
It will not duplicate filters during any type of translation. You need to create them manually for both languages.
Best Regards,
Victor
Hi metromart99
The new plugin update, which adds support for duplicating Filter Sets, will be released today in a couple of hours.
In your case you can duplicate a filter set, and swith the language for it, so it will go to the another language.
Best Regards,
Victor
Hello, Is it possible to replace the ? appended to the end of URL for parameters with # instead? For example, changing my-url/?param=val to my-url/#param=val for both AJAX and non-AJAX functionality.
Thank you very much. Best regards.
Hi jruizcantero
This is not possible. The ”?” symbol is reserved for the GET parameters in the URL. The ”#” symbol in a URL is reserved for the fragment identifier, which has a specific role in web standards. The fragment identifier specifies a particular section or anchor within a webpage. For example, my-url.com/#section1 tells the browser to scroll to the HTML element with id=”section1”.
Best Regards,
Victor
True, the standard says what you say, although thinking out the box, from the SEO/Crawlbudget point of view there are also several cases using # to reference parameters that will be ignored by bots without having to resort to blocking in robots.txt
https://yoast.com/measure-social-media-efforts/#:~:text=At%20Yoast%2C%20we%20use%20a%20%23%20to%20start%20off%20the%20UTM%20tag%2C%20but%20most%20tools%20use%20a%20%3F.%20We%20use%20the%20%23%20because%20then%20we%20know%20for%20certain%20that%20we%20are%20not%20causing%20duplicate%20content%20since%20Google%20ignores%20anything%20a fter%20the%20%23.%C2%A0So%20let%E2%80%99s%20break%20down%20this%20UTM%20tag%2C%20shall%20we%3F https://yoast.com/help/advanced-crawl-settings-permalink-cleanup/#:~:text=approach%20%E2%80%98out%20of%20the%20box%E2%80 %99%2C%20and%20this%20can%20improve%20your%20site%E2%80%99s%20crawl%20efficiency%20without%20sacrificing%20functionalityIn that case, it won’t be possible to create SEO Rules for those pages, as Google will simply ignore them. That said, you can experiment with it if you’d like, but keep in mind that doing so would require rewriting the plugin core. This could introduce additional issues, especially given the many nuances involved.
Best Regards,
Victor
Hi Victor,
Is it possible to display two filter sets on the same page?
What I’m trying to achieve is to have the search bar to be displayed on the top row with 100% while the other filter items would be displayed on a sidebar.
Thank you.
Hi mvseitz
Yes, it is possible. You can use either two widgets on the page or two shortcodes [fe_widget] (not mixed) and apply two filter sets to the same page.
In the filter set, there will be a priority option (at the bottom of the setting) you can use it to define which filter set appears first on the page (the one with the higher priority appearing first)
Best Regards,
Victor
I’m experiencing an issue with the tooltip functionality. We’ve added a basic tooltip to one of our filters using the plugin’s settings, and the question mark icon associated with the tooltip is visible on the front end.
However, when we hover over or click the question mark icon, nothing happens. The tooltip content is not displayed at all.
We added the tooltip text in the ‘Tooltip Text’ field for the specific filter in the plugin settings. We also have an Elementor pop-up that would trigger if clicked based on the tooltip css specific identifier and that doesn’t work either.
We are looking for any guidance on why the tooltip might not be displaying and how to resolve this issue. Any help would be greatly appreciated.
Hi seanj33
Thank you for choosing Filter Everything PRO.
Please send the link to the page with the issue so we can check it.
Best Regards,
Victor
Here is a link to check: https://tardigrada.help/category/key/lateralcirria-absent/
Hmm, yes indeed, no visible errors, or any other signs of errors.
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Best Regards,
Victor
ok, we are moving forward with this help. Thank you!
I have sent a PM as requested with the login credentials.
We’ve checked your site, including the page with the issue, and also created a test page with a separate filter set to verify the functionality. And it is not working.
However, we have changed your theme to the default WordPress theme, and it works correctly. We also tested it on our end using the Elementor theme (the same one you’re using), and everything is working as well.
This suggests that the issue lies within the modified version of your theme. We’re not sure exactly what was changed or removed, but those modifications causing the problem.
Here are the results with the default WP theme – https://prnt.sc/cU0wFtGZpyY5 on your site. You have to enter the mouse on the ”?” icon and click the left button in order to make it appear.
Here are the results on our end with the Hello Elementro theme – https://prnt.sc/P1bupTRRDD08
Best Regards,
Victor
How do I find your table for your plugin in the SQL database?
Hi bokishaNET
The plugin does not create a separate table for its settings and filter sets. It uses the default WordPress approach, so its data is across the standard database tables.
Best Regards,
Victor
Hola, compré otra licencia más, esta vez para https://añelo.com/ la instalé pero no le coloca la licencia, dice “Invalid site URL was sent.”. Dejo los últimos dígitos del código de compra 25cbf2830977
Saludos
Hi gianpizzo
Please write your request in English so we can assist you. Support is only available in English, as we do not have multilingual support staff.
Best Regards,
Victor
Hi, I purchased another license, this time for https://añelo.com/. I installed it, but the license isn’t being applied—it says “Invalid site URL was sent.” Here are the last digits of the purchase code: 25cbf2830977
Regards.
Hi gianpizzo
It is important to keep in mind that the License key and CodeCanyon purchase code are two different things.
Please use incognito mode in your browser!!!
In order to set the License key for the Filter Everything PRO plugin, simply head to Filters -> Settings -> License and click the “Get your License Key” button.
It will take you to a new page where you have to log in with your Envato credentials (with an account where you have purchased the plugin) and obtain your License key.
If you already using this license key, and it is still not working, please send the credentials to the wp-admin dashboard following this document with the license key that you get from the instructions that we send.
Best Regards,
Victor
We’ve already sent the requested credentials.
This is quite a unique case. It appears to be either related to the domain name or an issue on the server side. We’ve forwarded it to the development team, and they said they can look into it tomorrow and provide a solution.
Best Regards,
Victor
Alright, we’ll be waiting for your feedback. Best regards.
All done! The license is activated now.
Best Regards,
Victor
Thank you, we’ll review it shortly
Hi there,
How can I hide specific filters in different categories? Is it possible at filter level or is it required to use multiple filter set?
I know the setting about hiding empty filters but in some categories maybe 2 or 3 products is included in a filter, and because it is that few, it doesn’t make sense to show it at all in that category.
Hi pstidsen
The only option is to use separate filter sets. Even if you apply some filters through code, it would require writing custom logic for each category page, with different conditions to remove unnecessary options. Maintaining that setup would be quite troublesome.
However, if you still wanna try it, you can check this page with hooks – https://filtereverything.pro/resources/hooks/ there is a hook “wpc_terms_before_display”
Best Regards,
Victor
OK, thanks for your quick reply! I will start added all filters and then I will see whether having multiple filter sets is smarter than removing some filter by code.
Can I just return an empty array in wpc_terms_before_display if I want to hide the filter completely?
Hmm, that’s a really good question. We have never tested it in such a way.
Best Regards,
Victor
So no way to hide the filter entirely programatically?
So you want to hide the entire filter, like color, size, rather than exact term blue, red…? Or do you want to hide the entire Filter Set?
Best Regards,
Victor
I was looking for a way to hide the entire filter, like color or size.
We’ll pass it to the development team so they can check if it’s possible. Once we get an answer from them, we’ll let you know right away.
The easiest way is that you can use simple CSS to hide it as each page has a unique ID, same as filters.
Best Regards,
Victor
So here is the hook and example of how to remove some:
add_filter('wpc_view_include_filename', 'remove_wpc_ram_filter', 10000, 3);
function remove_wpc_ram_filter($view, $filter, $set) {
if (isset($filter['e_name']) && $filter['e_name'] === 'pa_ram') {
return ''; // Return empty string to skip this filter
}
return $view;
}
Best Regards,
Victor
Hi, We have a CPT named resources and taxonomy resources_cat. When I try to add the shortcode [fe_widget] it breaks the page and says a critical error on the website. Although the website works fine, only the page where shortcode has been added breaks. Any idea what’s breaking the page or what I can do to fix the issue.
Hi Dhvani123
Thank you for choosing Filter Everything PRO.
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Also, please send the link to the page that is broken.
Best Regards,
Victor
Hello, we have a small problem. We activated ajax and named the container with the correct ID, but nothing happens. Any idea, what could help?
Thank you in advance! Best regards, Ralf
Hi Ralf
Thank you for choosing Filter Everything PRO.
Please send the link to the page with the issue so we can check it.
Best Regards,
Victor
Hi Victor, you can have a look at the website: https://it-service-finder.com via htaccess User secretpreview Password SecretPreview
Its directly implemented on the homepage.
If you need access to the backend send me your email. Thanks in advance! Best regards, Ralf
The issue is that you have a mixed content issue on the site – https://prnt.sc/7B0jZaCpXwZ1
Please fix it, more likely your domain name in the database is still using HTTP instead of HTTPS.
Best Regards,
Victor
Thank you for your help. We fixed it. But it’s still not working. Best regards, Ralf
Hi Ralf
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Best Regards,
Victor
Hello Victor, we installed the plugins and you got the requested log in information via your support email. Thank you in advance! Best regards, Ralf
Everything is working now. Please go to the page with the filters, select the required filter, and click the Apply button at the bottom of the filter section (since you are using the Apply button functionality).
Best Regards,
Victor
Thank you, but it’s not working. :-/ I tested it and it’s less working. If I had previously selected several boxes and then clicked away the chips, for example, the selection was reloaded. Now nothing happens, even if I click on the ‘Reset all’ chip. Futhermore by clicking on the left side the Resume button, nothing happens. Did that work in your browser? I have tested it with Firefox. Best regards, Ralf
Hi RSchulte
If you change settings in WordPress and set the page (where the filters were applied) as the homepage, you will need to reapply the filter set to the homepage.
We just turned off the “Apply Button” so it will be easier to see how it is working, here are the results from the Homepage – https://prnt.sc/Umkfz5se-XZ5
Best Regards,
Victor
You are great! Now it works fine.
Just one more question: Any idea how we can integrate a pagination below the results to load further results (if we only want to display the first 10)?j
Thank you so much! BR, Ralf
Our plugin does not provide pagination. What you can do is contact the page builder support if you are using it to display posts on that page, and ask how you can add default numerical WP pagination (not load more/infinite scrolling) as they can be incompatible based on how they are working under the hood, it is always unique approach when it comes to such paginations.
Best Regards,
Victor
Great, thank you very much for your help. That was quick! Best Regards, Ralf
Hello! I’m going to buy the pro version, but I can’t figure out how to activate it? I’ll receive a key by email, but in the WordPress admin panel – plugins – settings, there is no License section to enter the key. Please explain how this happens? Thank you
Hi listanislav312
Thank you for your interest in the Filter Everything plugin.
If you purchase a PRO version of the plugin, you will be able to download the PRO version from this site. This plugin is absolutely separated from the Free version, and it will include the license tab in the Filters > Settings.
The instructions on how to get the license key are on this page – https://filtereverything.pro/resources/license-key-issues/
Best Regards,
Victor
Hi Filter Everything PRO Support Team,
I’m trying to create a filter for the frequency range of our products.
For each product, I have two custom fields with numeric values:
frecuencia_minima (minimum frequency) frecuencia_maxima (maximum frequency) I would like to create one single numeric range filter on the frontend using these two custom fields as the lower and upper bounds of the range.
I have tried adding a new filter with “Filter by” as “Custom Fields” and enabling the “range slider” option, using frecuencia_minima as the “Meta Key”. However, I don’t see options to specify the meta key for the maximum value.
Could you please advise on how to correctly configure Filter Everything PRO to use these two separate custom fields to create a single numeric range filter?
Thank you for your help.
Best regards,
Hi marketingw64
Thank you for choosing Filter Everything PRO.
Unfortunately, this is not possible. You can create only one filter from one entity. You cannot mix them together.
So this will require two range filters, one for min and another for max.
Best Regards,
Victor
This item was featured on CodeCanyon
Elite Author
Contact the Envato Market Help Team
