8957 comments found.
Hi, We have a CPT named resources and taxonomy resources_cat. When I try to add the shortcode [fe_widget] it breaks the page and says a critical error on the website. Although the website works fine, only the page where shortcode has been added breaks. Any idea what’s breaking the page or what I can do to fix the issue.
Hi Dhvani123
Thank you for choosing Filter Everything PRO.
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Also, please send the link to the page that is broken.
Best Regards,
Victor
Hello, we have a small problem. We activated ajax and named the container with the correct ID, but nothing happens. Any idea, what could help?
Thank you in advance! Best regards, Ralf
Hi Ralf
Thank you for choosing Filter Everything PRO.
Please send the link to the page with the issue so we can check it.
Best Regards,
Victor
Hi Victor, you can have a look at the website: https://it-service-finder.com via htaccess User secretpreview Password SecretPreview
Its directly implemented on the homepage.
If you need access to the backend send me your email. Thanks in advance! Best regards, Ralf
The issue is that you have a mixed content issue on the site – https://prnt.sc/7B0jZaCpXwZ1
Please fix it, more likely your domain name in the database is still using HTTP instead of HTTPS.
Best Regards,
Victor
Thank you for your help. We fixed it. But it’s still not working. Best regards, Ralf
Hi Ralf
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Best Regards,
Victor
Hello Victor, we installed the plugins and you got the requested log in information via your support email. Thank you in advance! Best regards, Ralf
Everything is working now. Please go to the page with the filters, select the required filter, and click the Apply button at the bottom of the filter section (since you are using the Apply button functionality).
Best Regards,
Victor
Thank you, but it’s not working. :-/ I tested it and it’s less working. If I had previously selected several boxes and then clicked away the chips, for example, the selection was reloaded. Now nothing happens, even if I click on the ‘Reset all’ chip. Futhermore by clicking on the left side the Resume button, nothing happens. Did that work in your browser? I have tested it with Firefox. Best regards, Ralf
Hi RSchulte
If you change settings in WordPress and set the page (where the filters were applied) as the homepage, you will need to reapply the filter set to the homepage.
We just turned off the “Apply Button” so it will be easier to see how it is working, here are the results from the Homepage – https://prnt.sc/Umkfz5se-XZ5
Best Regards,
Victor
You are great! Now it works fine.
Just one more question: Any idea how we can integrate a pagination below the results to load further results (if we only want to display the first 10)?j
Thank you so much! BR, Ralf
Our plugin does not provide pagination. What you can do is contact the page builder support if you are using it to display posts on that page, and ask how you can add default numerical WP pagination (not load more/infinite scrolling) as they can be incompatible based on how they are working under the hood, it is always unique approach when it comes to such paginations.
Best Regards,
Victor
Great, thank you very much for your help. That was quick! Best Regards, Ralf
Hello! I’m going to buy the pro version, but I can’t figure out how to activate it? I’ll receive a key by email, but in the WordPress admin panel – plugins – settings, there is no License section to enter the key. Please explain how this happens? Thank you
Hi listanislav312
Thank you for your interest in the Filter Everything plugin.
If you purchase a PRO version of the plugin, you will be able to download the PRO version from this site. This plugin is absolutely separated from the Free version, and it will include the license tab in the Filters > Settings.
The instructions on how to get the license key are on this page – https://filtereverything.pro/resources/license-key-issues/
Best Regards,
Victor
Hi Filter Everything PRO Support Team,
I’m trying to create a filter for the frequency range of our products.
For each product, I have two custom fields with numeric values:
frecuencia_minima (minimum frequency) frecuencia_maxima (maximum frequency) I would like to create one single numeric range filter on the frontend using these two custom fields as the lower and upper bounds of the range.
I have tried adding a new filter with “Filter by” as “Custom Fields” and enabling the “range slider” option, using frecuencia_minima as the “Meta Key”. However, I don’t see options to specify the meta key for the maximum value.
Could you please advise on how to correctly configure Filter Everything PRO to use these two separate custom fields to create a single numeric range filter?
Thank you for your help.
Best regards,
Hi marketingw64
Thank you for choosing Filter Everything PRO.
Unfortunately, this is not possible. You can create only one filter from one entity. You cannot mix them together.
So this will require two range filters, one for min and another for max.
Best Regards,
Victor
Hello I want to change the authors on the filter https://prnt.sc/5HDHszPdw9ke. I don’t want all authors to be visible. I want to filter the author chosen by me. Is that possible? How can I edit? I want to let only 4 authors there. Thanks
Hi alfonsmala001
Thank you for choosing Filter Everything PRO.
Go to the filter set placed on this page > navigate to the authors filter > click “more options” > from there, use the “include/exclude” functionality.
Best Regards,
Victor
Hello Victor,
I have events that I’ve linked with a custom post “Teachers”. The relation is call “rel_enseignants_events”. It was working fine with the filter, I could filter the events by teachers.
But then I’ve encountered a strange bug. When I create a new event, it appears in the filter with the teachers. So in my filter’s teachers list I have now:
- Teacher 1
- Teacher 2
- Teacher 3
- My new event
- Teacher 4
- My new event 2
- Teacher 5
Obviously, I don’t want my events to appears in the filter. Could you have a look please? I think you already have the credentials to connect to my dev website. You can have a look of the bug here, in the filter “Enseignants” list :dev.mudita.ch/events
Thank you !
Best regards,
Alex
Hi Alex
We are not sure what you are referring to as a bug. If you create a filter from a taxonomy, custom field, etc., which has those terms in it, like:
My new event 2
My new event 5
They will be displayed in the filter terms. If you want to exclude some terms from a filter, you can go to the filter set > navigate to the required filter > “more options” > and use the include/exclude functionality from there.
Also, in the filter set settings under the “And what to filter”, there will be an option to hide empty filter terms.
Best Regards,
Victor
Hello,
Thanks for your answer.
In my filter set, I’ve created filters to be able to filter my event by category, teachers, location, etc. But in my “teachers” filter, with the meta_key to “rel_enseignants_events”, the names of the new event are now appearing. I only want the teacher in this filter. Why events name are appearing in the teacher filter list?
Regads,
Alex
You can check this custom field rel_enseignants_events in the database to see what type of values it contains.
Also, please check this page about ACF custom fields, but it is working like that in general with all custom fields, and barely anyone adds functionality to clear it all when doing some changes to it – https://filtereverything.pro/resources/acf-and-fe/#important
Best Regards,
Victor
Ok I figured it out why the events name where appearing in my teacher’s filter.
It’s because I’ve enabled the bidirectionnal relationship in ACF. I disabled it and it’s working fine.
Thanks for your help,
Best regards, Alex
We are glad to hear that the issue was resolved.
Best Regards,
Victor
Hi,
We’re using Filter Everything Pro together with Divi and ACF to filter WooCommerce products by a custom field named edad_minima (minimum recommended age) for a board games shop.
We followed these steps:
Created a custom field (edad_minima) using ACF, set as a number field and assigned to products.
Assigned numeric values (e.g., 6, 8, 10) to individual products.
Created a filter set targeting the product post type.
Added a filter using the custom field edad_minima, set as a number-type filter with range display.
Inserted the filter using the widget on the shop page sidebar.
The filter appears correctly on the frontend, but when selecting a value (e.g., 25), no filtering is applied—either (the results always shows ALL the products in multiples of 24 per page.
Not all the products have the edad_minima set but for testing purposes we edited one of the products adding 25 as the minimum recommended age, but even then placing ages from 25 to 100 shows the 434 games on the site.
Ee’ve double-checked the meta key and field type. The URL shows some parameters, for example min_edad=24&max_edad=100
Please help us troubleshoot this issue.
The shop page is: https://magicboardgames.com.gt/wpdeguate/tienda/
The product with the edad_minima (minimum recommended age) is: https://magicboardgames.com.gt/wpdeguate/tienda/sin-categorizar/pesadilla-antes-de-navidad/Thanks in advance!
Hi svensanchez
Thank you for choosing Filter Everything PRO.
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Best Regards,
Victor
Hi, credentials have been sent (verified!)
Hi svensanchez
Done! It is working now – https://magicboardgames.com.gt/wpdeguate/tienda/?max_edad=10
The issue was that in the Filter Set, you chose the wrong query to filter(And what to filter).
Best Regards,
Victor
Hi, thank you but it’s not working anymore. I decided to use only your plugin for filtering and added some other filters to the group (number of players, game time, categories) but NONE of the filters work. Then I tried to revert it but it still doesn’t work (the only filter that is working is the price filter which is not from Filter Everything).
NOTE: the results always show ALL the games (434) BUT the filters bar is narrowed depending on what you select, so it seems to do work on the filters bar but it doesn’t show the correct results on the content section.
Hi svensanchez
We’ve installed the Code Snippets plugin and created a test page here: https://magicboardgames.com.gt/wpdeguate/fe-support-test-page/This page uses a separate filter set, so you can experiment freely.
Once you’ve confirmed everything is working as expected, you can add all the filters to the shop page. Be sure to test both options in the “And what to filter” setting: https://prnt.sc/oyKuKJQcgDaESelect one option, click the Update button, wait for the changes to apply, then refresh the page with the filters and test them. Repeat the process for the other option if it is not filtering products on the page.
Best Regards,
Victor
Hi, thank you.
The test page you created is working however we are still unable to do what we need:
This is a boardgame site, so each game has a field where we set the minimum recommended age for it. That means that if I set the minimum age for a game as 8, in reality it means 8+ (8 and over).
So, when people filter games by age, and they chose 15 as the age, they should get all the games that could be played by people 15 years old, which would be not only games marked as 15, but also all the games that have a lower value, as a 15 year old can also play games for 10 year olds for example.
We can’t find a setting to do that.
Hi svensanchez
If you have a range slider for age, you need to adjust the maximum value slider, not the minimum one. If you set the maximum to 15 and don’t touch the minimum, you’ll get all values from 0 to 15. If you move the minimum to 8, you’ll get all values from 8 to 15.
Additionally, with the help of custom CSS, you can hide the not-required UI elements from the exact range filter. You can place your custom styles in the Filters > Settings > Experimental > Custom CSS.
Best Regards,
Victor
Hi there,
Im working on new site with Avada theme. First with the free Filtereverything pluging and things seems to work. Because i want the Filters to behave on mobile as a nice widget like on https://demo.filtereverything.pro/product-category/clothing/women/color-red/brand-hm/c-kind-dress/?max_price=100 i just purchased the Pro version. But the mobile widget is not working. How can this be solved?
https://wish.devshop.nl/shop/If you want i can give you admin credentials
Imre
HI there, you can close this ticket, already managed it 
Hi Imre
Thank you for choosing Filter Everything PRO.
We are glad to hear that the issue was resolved.
Best Regards,
Victor
Добрый день! Собираюсь купить про версию, но не могу понять как активировать? Ко мне на почту придёт ключ , однако в админке wordpress – плагины – настройки, нет раздела лицензия что бы ввести ключ. Объясните пожалуйста как это происходит? Спасибо
Hi listanislav312
We do not support accounts from russian, russian websites and in russian language due to russia’s aggressive war in Ukraine.
If you are contacting us from another country, please submit your request in English. According to our support policies, assistance is provided exclusively in English, with no exceptions.
Best Regards,
Victor
Hello again. I have a page called Directory which is in my main navigation. I have an SEO rule created with an SEO Title (that’s supposed to go between the title tags in the source code) but when I am on the SEO Rule’s url page, it replaces my “Directory” navigation link with the full SEO Title, which is very long and not what I want. Is this by design, or is it something I did not configure correctly? Thank you again for your time.
Hi bravewhale
Can you please send the link to the page with the instructions on how it can be recreated?
Generally, there is no support for accounts whose support period has expired following the support policy.
We will help you once we have addressed all requests from accounts with valid support periods. Please note that this process may take some time, possibly days or weeks.
If you want to receive it faster, please extend the support period. We will prioritize processing the request for supported accounts.
Best Regards,
Victor
Fair enough. I will see if I can figure it out, and if needed I will renew my support. Thank you.
Hi bravewhale
Sure, in any case, let us know the results.
Best Regards,
Victor
Hey Team, what are the correct HTML ID or class for filtering? I use the XStore Theme with Elementor. The Product arcive is built with Elementor Template. If you need i can share credentials for the staging website.
Hi ProdbyDaan
Please check this page – https://filtereverything.pro/resources/ajax-instructions-only/ also, since you are working with Elementor, you can apply custom Classes to the container with the products/posts that you need to filter.
Best Regards,
Victor
Hi,
I’ve tried it that way, but unfortunately I can’t get it to work. Could you please check it on my site? via admin login
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Best Regards,
Victor
Hey, i sent you the credentials via pm.
Here’s an example with the shop page:
1) Elementor applies a class on the products container – https://prnt.sc/27dCyZc57VeI
2) Use this class in the FIlters Set applied to the SHOP page – https://prnt.sc/AnIomMro5eTN
3) Now you can test it with the range slider by price, as the categories are simply all empty since you displaying one category on that page.
You can do the same for the other pages and filter set.
Best Regards,
Victor
Hey, thanks. But the thing is, I don’t have a single shop page. I don’t use the WooCommerce shop page. I work with shop pages that always lead to a product category. I also use Elementor archive templates. So the Elementor Shop Arichive Template only works for the Product categorie “Überdachung”
So when i go to my filter sets -> Überdachung, this is configured https://i.imgur.com/gtmmJuE.png.
Also i named the Elementor class as it is configured in the filter set. https://i.imgur.com/WDTh57Z.png
But the filtering doesnt work.
That’s the issue with the chosen query: https://prnt.sc/gnVqxfFiMycV We have set the correct one and it is filtering.
Best Regards,
Victor
Hi Victor
I just purchased the pro version, but need help with startup.
At https://educentrum.be/test-filter I want to be able to filter out our Woocommerce products. I am using a theme that does not allow widgets in Elementor. From there I do via shortcode. I want to filter on the product attributes. But on the page I see the error code that no filter terms are available.
Via PM I have sent our login details. Thanks in advance Mario
Hi Mario
Thank you for choosing Filter Everything PRO.
In order to filter your posts/products, you have to display them on the page first via WP_Query (grid loop widget) in Elementor. If the page is empty without posts, the filter will not create them on the page.
Best Regards,
Victor
Hi Victor, thanks for your quick respons. I need more help. Can you assist me please?
Yes, we can, but we need an exact question with which we can help you.
Best Regards,
Victor
Can you edit https://educentrum.be/test-filter so I can start filtering our products by the attributes available: “aanbod” + “onderwijstype” + “periode”?
All done, now you can check it how it is working on this page – https://educentrum.be/test-filter/
Best Regards,
Victor
Hi Victor, thank you so much for setting this up! It helps me a lot to learn how to use the plugin.
Another question. Can I create a filter that excludes a certain product category?
Example: On page “Companies” I want to show only the products marked with the category ‘companies’. On the other page “Schools” I show all products where the category “companies” is NOT designated.
Yes, you can. For this, you would need separate filter sets for those pages, navigate to the required filter > “more options” and use the “include/exclude” functionality from there.
Best Regards,
Victor
Hi Victor, can you help me out on https://educentrum.be/workshop/ please? We don’t wanna see the products of the category “Tools”.
I’ve adjust the filter set with excluding the term. But the “tools”product are still visable. https://educentrum.be/wp-admin/post.php?post=1497&action=edit
Hi Mario
The products themselves will still be visible. The include/exclude functionality only removes the filter terms. To remove certain products from that page, you need to modify the query that displays the products.
If you’re using Elementor, you need to modify the widget that displays products and apply the appropriate settings to show only the required ones.
Best Regards,
Victor
Hi Victor, alright, I see what the exclude function does now.
When I filter by categories in the products widget, the filter no longer works. See picture (https://drive.google.com/file/d/1Za6UdmnzeQzaWulu7KaHuy6HOcIy67pP/view?usp=sharing). As you notice on https://educentrum.be/workshop/ the filter is not working now.
Do you know a workaround for our question?
Yes, after you applied those changes in the Elementor > go to the filter set on this page and hit the update button so it will start working with the modified query.
Best Regards,
Victor
Unless I’m doing something wrong, nothing has changes: https://educentrum.be/wp-admin/post.php?post=1486&action=elementor
If you can turn off those settings we can check it for you – https://prnt.sc/8wOQDPdG0AiS currently it is not allowing us to do anything on the site.
Best Regards,
Victor
I disabled the 2FA forcing. Thanks in advance!
Please check if everything is filtering now on this page – https://educentrum.be/workshop/
Best Regards,
Victor
You rock, Victor! Thanks! How did you fix it? So I can learn it myself.
We simply went to the filter set, cleared the Divi cache, and clicked the update button. Make sure to wait until the page fully refreshes for the changes to take effect. Then, go to the page with the filters, reset it, and everything was displayed correctly.
Best Regards,
Victor
Добрый день!
1
Hi, I wanted to know if the plugin is compatible with the Themefusion Avada theme. I know that there is no integrated element in this builder but I wanted to know if using the shortcodes it is possible to call the custom post types created with ACF and customized with Avada. Thanks Corrado
Hi lift-crea
Thank you for your interest in the Filter Everything plugin.
Yes, it’s absolutely compatible. You can create your own shortcode to display your CPT posts via WP_Query in order to filter them. Also, you can use either widgets or shortcodes to display the filters.
Best Regards,
Victor
Thanks
Hi, wpc-filters-range-inputs doesn’t work anymore. What’s wrong with it? Instead of nice range element showing 2 number inputs
Hi officerbcode
The issue could be due to one of the following reasons:
1) The option might have been disabled in the filter set settings under “More Options”
2) There could be a conflict with a third-party plugin on the site or a custom code.
3) Custom code or caching issues might be interfering with the filter functionality.
We recommend deactivating your plugins one by one to identify if any of them are causing the conflict, turning off all of the caching for testing, and disabling custom codes. This can help isolate the issue and find the root cause.
Generally, there is no support for accounts whose support period has expired following the support policy.
We will help you once we have addressed all requests from accounts with valid support periods. Please note that this process may take some time, possibly days or weeks.
If you want to receive it faster, please extend the support period. We will prioritize processing the request for supported accounts.
Best Regards,
Victor
I have the “Code Snippets,” “ACF,” and “Filter Everything Pro” plugins. There is a taxonomy with five attributes. Each of these five attributes has different variables (all ACF fields). Each product is assigned values in all five taxonomies.
Is there a way to build a filter that allows the customers to first select the taxonomy and then display and select only the values associated with that taxonomy?
Hi mandyk8
Thank you for choosing Filter Everything PRO.
Do you mean that you have ACF custom fields assigned to your taxonomy attributes? If this is the case, they will not work at all, you need to apply custom fields to your CPT posts.
After that, you can use the “Parent” filter settings. For example, create a category filter, then create a filter based on a custom field > click on “More Options,” select the parent filter, and choose the option “Do not display until the parent filter term is selected.”
Best Regards,
Victor
Hi Victor,
thank you for the quick response. I am familiar with the behavior described, and it works for me.
However, I would like to display only one (!) subordinate filter after selecting an element from the taxonomy. My taxonomy has five properties, and each property has various subproperties.
I have created a separate filter for each subproperty. At the moment, all five dependent filters appear when I make a selection in the taxonomy.
However, I would like to display only one of the subfilters, depending on the selection in the taxonomy. Each product has values in all five taxonomies.
I hope I have been able to describe my question more precisely now.
Best Regards Mandy
You can hide empty terms from the filter, there is an option available for that under the “And what to filter” in a filter set. However, keep in mind that if the selected taxonomy has posts associated with it that contain other custom fields, those terms may still appear in the filter results.
Best Regards,
Victor
Hi Victor,
I know and use this option. The displayed filters are all non-empty. That’s why they are displayed.
To explain again: I select a value from my taxonomy. Based on this, only one of the five dependent filters should be displayed. Currently, however, all five dependent filters are displayed as soon as a value is selected in the taxonomy (this happens because they are set as dependent filters of the taxonomy filter, which only appear when a selection is made in the taxonomy filter). So what I want to achieve is that only one of the dependent filters is displayed, namely the one that displays the values belonging to the selected taxonomy, not all five.
Should I add another example?
Best Regards Mandy
Ah, so basically, what you are looking for is the conditions to display an exact child filter after you select an exact parent filter term. Unfortunately, this is not possible yet. Currently, it is only working in general; when you select any filter term, it will display all of the child filters attached to it.
Best Regards,
Victor
Hi I purchased the product on May 17. I cannot seem to get filters to work. I set up a filter set for price, categories and brands and want the same set to display on all pages, archives as well as my New Arrivals and Coming Soon pages(I bring info in with CSV and tags weekly). Site is built with Elementor Pro & Hello theme, so employ a Filter Everything – Filter widget under the Wordpress section.
I tried various different settings, following the Filter Everything site tutorial, youtube, ai, etc. Please assist. Thank you
Hi wgeldenhuys
Thank you for choosing Filter Everything PRO.
Unfortunately, you cannot use a single filter set across all pages. Each page, especially singular ones, can have a unique query, and the filter set is designed to work with only one query at a time. In order to make sure the correct filtering, you need to create separate filter sets for each page that uses a different query.
If you cannot make the filter work on a certain page, please send the credentials to the wp-admin dashboard following this document so we can check it.
Also, please send the exact link to this page, so we can set you a filter set example on how to display it there.
Best Regards,
Victor
Hi, I was using the Filter Everything PRO plugin and suddenly it tells me that it is blocked for not having a license, I have put the license back and it tells me that it has been used for two sites, when in fact it has only been used on my site (www.rolser.com), what can I do? The proof of purchase is 113e02f4-cb0b-47e1-b2fb-f74ed77ef3a7
Hi asignes
Please send your license key via PM – https://codecanyon.net/user/fe_support
So we can deactivate it across all sites.
Best Regards,
Victor
Hi There, I have implemented the filter and everything works well. Just a question I have regarding the language variation:
- What short code do I use on the lang page - When I switch on the translate on WPML it goes blank
Do you have some steps I can put it place to accomodate and implement the lang option
Hi ClintHendricks
Thank you for choosing Filter Everything PRO.
When translating the filter set, please navigate to the filter set in the required language and create all the necessary filters. The translation will not duplicate the filters; you simply need to create the filters for the target language.
Also, please check this page – https://filtereverything.pro/resources/with-wpml-polylang/
Best Regards,
Victor
Hi guys!
I have the problem. My website is built with Flatsome theme. So I added filter through shortcode.
Below filter, also through shortcode, I added PHP file, where is located WP_Query and PHP/HTML logic to output products. In filter plugin settings, I chose that WP_Query as “What to filter?”. Also, I added 3 filters to that filter: one by category, two by product attributes. Now, I saved the filter. On the page, when I open dropdown of filter by category, for example, or filter by attribute, it shows all options in filters as grey (meaning there are no products available for this option), but when I choose option, product with that category/attribute appears (I also use AJAX).
Can you help with that?
Guys, it seems that it works for now as expected, thanks
Hi luchykkolya
We are glad to hear that the issue was resolved.
Best Regards,
Victor
This item was featured on CodeCanyon
Elite Author
Contact the Envato Market Help Team
