8952 comments found.
Hi, I need your help with category filtering: https://www.zlataihla.eu/shop/kategoria-kusovy-bytovy-textil/. My problem is that if I want to show products from selected subcategories, all products from the parent category are shown. If I am using the AND method, the counter shows 0 for every subcategory that was not checked.
I need filtering to work like the categories on the demo page: https://preview.codecanyon.net/item/filter-everything-wordpress-woocommerce-filter/full_screen_preview/31634508
Hi WebandgoMacsi
Thank you for choosing Filter Everything PRO.
The only way is to use “AND” logic here. If you are using “OR” logic, then you need to choose only subcategories if you choose both sub and parent category it will display everything from the parent category. Only the “AND” logic will help here to choose a parent category and then sub one in order to show the correct items.
It cannot work like OR for parent categories and AND for subcategories.
Best Regards,
- Victor
Hi, thank you for the advice. The only thing I cannot solve is the quantity in brackets. There are two main categories. If I select a main category, then every product has 0 quantity in the other category. Please open the URL: https://www.zlataihla.eu/kategoria/kusovy-bytovy-textil/kategoria-dekoracne-obliecky-na-vankuse/
If you mean that those categories are empty – https://prnt.sc/W_ebfBhCW2E_ on this category page – https://www.zlataihla.eu/kategoria/kusovy-bytovy-textil/kategoria-dekoracne-obliecky-na-vankuse/ do they have any products that are displayed there which have applied on the any of the empty categories?
Best Regards,
- Victor
Hello,
My client has an online store where we need to display variations in the product list. This plugin does an excellent job, but unfortunately, your wonderful plugin is not listed among the compatible ones, and indeed, it does not work 
Do you have a fix or are you planning to make it compatible with this extension?
Hi luniverslux
Yes, unfortunately, there are issues with such plugins that display each variation as a singular product. And there is not much that can be done in order to show it all correctly. We do not know any plugins that would work normally with it. Our recommendations here either use singular products, or default variations as they are in Woo. Instead of converting variations into singular ones. As you might also notice, there are no filtering plugins in the compatibility list only one which is included with the theme.
Best Regards,
- Victor
Hello,
I bought the Pro version. The filter looks normal within the page, but I can’t see the results even if I choose the option.
I sent that page link to PM.
Please check the message.
Hi gloim5646
Thank you for choosing Filter Everything PRO.
The filtering plugin filters posts that are displayed on the page, it is not displaying the products on the page. The posts should be displayed with the WP_Querry, for example, the Elementor loop grid, archive pages, Woo shop page, all of them using WP_Query in order to display the needed posts.
Best Regards,
- Victor
I created a filter for Categories. In the filter dropdown, is there a way to order the categories listed in alphabetical order? Right now it’s random.
I don’t want to code a custom list since the client will add new categories over time.
Thanks, Michelle
Hi Michelle
Thank you for choosing Filter Everything PRO.
Go to the filter set, locate the needed filter, and click the “more option” From there choose the needed sorting order – https://prnt.sc/jr0hpBJTQQeM
Best Regards,
- Victor
THANK YOU!
I created a taxonomy using ACF, then I created a filter by making the necessary adjustments using FilterEverything. The filtering section opens on the page I want to use, but the results are not listed.
https://prnt.sc/Qx4ufFMLtyop https://prnt.sc/YgIlrQOJz77RHi ozgurcelebi
Thank you for choosing Filter Everything PRO.
Please send the screen of how you created the filters in the filter set also, please check if you are using the correct query in the “And what to filter” dropdown.
Best Regards,
- Victor
We did what you said but no solution was produced. We asked you before we bought the product if this was possible and you said yes. Please see the video. https://youtu.be/Alx7JIURhfg
Hi ozgurcelebi
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Best Regards,
- Victor
we sent you login details
Hi ozgurcelebi
We have checked the site, and we are not sure what exactly you want to filter on that page, as you simply do not have any posts or products there. But since the filter set was set to filter pages, we edited that page with Elementor and added a loop grid in order to display pages, and chose the correct query in the “And what to filter” and it is filtering pages.
The filter itself does not display anything, it only filters already-displayed posts on the page.
Best Regards,
- Victor
Yes, it filters the pages exactly as we wanted, thank you. But this filtering image is broken. ( https://prnt.sc/6dxCmBBF1XAM ) When I select dropdown in the filter menu, arrows appear on top of each other in the image. Can you fix this?
Hi ozgurcelebi
We have checked the site, and the issue is in either the theme styles or some plugins adding additional arrows with after and before. And messing with the rest styles.
Even though the CSS is out of the scope of support policies, we have added quick-fix styles in the Filters -> Settings -> Experimental -> Custom CSS. We’d recommend saving them just in case so you won’t lose them.
Best Regards,
- Victor
This is our sample page: https://demo.vedikstudio.com/katalog/
All pages except filtered pages are shown. For example; My Account, Login and all other pages without filters. How do I hide them? I want only tagged pages to show.
The error is here: https://ibb.co/StbzHdy 3 more tabs below and all pages are listed.
Actually, it is not connected to our plugin, but you can do it in Elementor – https://prnt.sc/zOgwoVjSS4tl
Best Regards,
- Victor
Pre-Purchase Question:
Is it compatible with elementor pro built pages?
Hi Spyros12nik
Thank you for your interest in the Filter Everything plugin.
Yes, it is compatible with the Elementor PRO. Please check this demo with Elementor – https://demo.filtereverything.pro/elementor/
Best Regards,
- Victor
Thank you so much, it looks great.
Final Question:
I have already created custom categories using ACF plugin for a custom post type. I can use those categories in the filter?
Hi Spyros12nik
Yes, you can use it to create a filter out of it, but please note you cannot create multiple filters from one taxonomy. So if you are planning to create multiple different filters from one taxonomy then we’d recommend adding custom fields with the needed data to your posts in order to have the ability to create a separate filter from each custom field.
Best Regards,
- Victor
Hi there, I use the plugin to filter products on woocommerce category pages. This worked out fine until now. However, recently, a few of the category pages do not display anymore. When opened, they show the 404 error message. When the filter everything pro plugin is deactivated, the page becomes visible again. In the filter settings for the non-visible category pages, the “Filter what” -Chose query does not display any query anymore. Yet, the categorys for which no query can be found, are identical to the other categories, which have queries in the filter settings and whose pages are displayed. I’m honestly a bit confused. Do you have an idea how to solve this?
Hi jukuk
Go to the Filters -> Settings -> URL Prefixes and change the prefixes to unique ones like fe_prod_cat, fe_prod_color, fe_prod_size, and so on.
But please note that we used the _ and not the – it is very important.
Best Regards,
- Victor
Thank you!
Hello Stepasyuk, how are you ?
I have a bug with the mobile filter, could you help me please ? When I select a category on mobile with AJAX ON the filter disappear and the overlay still in place. There is a way to desactivate AJAX on mobile only ?
Thanks !
Instead of using the popup I have choosen the acordeon option and it works better
Hi alineo
Please try following the instructions from this page – https://filtereverything.pro/resources/ajax-instructions-only/ in order to choose the correct container for AJAX updating.
More likely you choose the container that contains filters as well, and it should not be chosen.
Best Regards,
- Victor
Thank you 
If I put the filter widget in the sidebar, throughout the site the filter is applied. Is there any way to make the sidebar filter show only and exclusively in the product categories? I would like wordpress pages for example to be without sidebar.
Hi vamadivani
Thank you for choosing Filter Everything PRO.
Well, you can place the filter set in the “Where to filter” – “product categories + any category.”
While you are logged in as admin you will see on other pages a message saying that there is no filter set applied to this page, but as long as you are not logged in as admin there will be nothing in the widget area.
Best Regards,
- Victor
I did as you told me, I decided to have the filter show in only one category. In the chosen category everything is perfect, in the other categories and pages (from not logged in) the sidebar remains empty. If I try from mobile there is the filter button but it doesn’t open anything. If there is no filter there should be no filter button either right? I wish the sidebar is not there at all if there is no filter.
Hi vamadivani
Try it following the instructions:
Go to the Filters → Settings → Experimental and turn on the “Hide opening widget buttons” option. It will hide the mobile filter button, so you can use the shortcode [fe_open_button] to display the mobile filter button in the needed place. You can place it in the widget sidebar as well as a shortcode and then check it.
Best Regards,
- Victor
The problem is that even in the product pages I have the sidebar, and it doesn’t have to be there. I want the sidebar to be only in the categories, product pages and standard pages should be full width. How should I do this?
In this case, you need to contact the support team of the theme you are using with this issue. As it all depends on the page templates. Therefore, they can help you with any tips on how you can edit their templates to show them the way you like.
Best Regards,
- Victor
Hi,
I have Filter Everything Pro installed on the site. I have 3 filters called Vehicle Make, Vehicle Model & Vehicle Year on the front end
On the product i have an ACF field group called Vehicle Fitment which is a repeater containing those 3 taxonomy fields.
Is there anyway to set it so that on the front end it onlys filters for an EXACT match of Vehicle Make, Vehicle Model & Vehicle Year?
At the moment, the repeater just saved all the terms to the product itsself
Hi adamb258
Thank you for choosing Filter Everything PRO.
Unfortunately, the filter is not working with the repeater field due to its dynamic nature. In the case of repeater, all subfields have dynamic keys like “some_0_key”, “some_1_key”, “some_2_key” and so on. Sure, you try to create filters by such keys. However, you don’t know how many times the repeater will be used for a post/product, and in general it is a bad idea to create 10-20 potential filters. Also, all of them will be separate filters like:
Repeater 1
- term 1
- term 2
Repeater 2
- term 3
Repeater 3
- term 4
So, in short, you can filter by the custom fields that were created inside of the group using their meta keys, but the repeater is not working in the way it should in order to create a filtering with it.
Best Regards,
- Victor
Is there a tweak to make it work with a repeater? Are wildcard repeaters supported? Using a % sign?
No unfortunately nothing like that, we are not even sure if there are any filtering plugins that are working with repeater fields.
You can create groups with custom fields and use them for the filtering.
Best Regards,
- Victor
Hi, I’ve got the plugin set up and it’s working great without AJAX, however when turning on AJAX the filtering seems to stop working completely. I’ve tried different classes and IDs following this guide https://filtereverything.pro/resources/ajax-instructions-only/ in case I’d used the wrong one but it doesn’t make any difference.
I’m fairly familiar with WordPress but i have very limited knowledge of AJAX and JS.
Page with the filtering is this one – https://countrywideparkhomes.co.uk/parks/silver-carrs-northumberland/
Hi TheWorks18
Thank you for choosing Filter Everything PRO.
We cannot find the filter following the link that you have sent us. We can only see the sorting widget on the page that’s all.
Best Regards,
- Victor
Apologies, that was my poor wording. i was referring to the sorting not filtering. Does this feature also work with AJAX or just the filter widget?
Try to apply the filter set on that page as well and then test it.
Best Regards,
- Victor
Thanks for the quick response. That seems to have helped, unfortunately it’s now messing up the formatting on the page showing the phone number everywhere.
So here is the thing the filter set should be applied to that page if you want to use sorting on it. But, if you want to use only the sorting widget on the page you can hide the filters.
Best Regards,
- Victor
Do you have any advice on what may be causing this to happen when changing the filter? – https://gyazo.com/dec37753dc8ea8255a634ebbf5034e2f
Try to use this class .elementor-element-39810ed9 for the AJAX container input. Please note that it should be used with the dot.
Best Regards,
- Victor
Everything seems to be working on page now, however the filter overlay and spinner are getting stuck, otherwise everything is working if i manually remove the overlay.
Hi TheWorks18
It could be connected to the errors on the site, you can check them in the console. Or it is caused by a conflict with third-party plugins, so you can try to disable plugins and check it.
Best Regards,
- Victor
Hello. I need to check on which sites I have activated the plugin.
Hi valko-pro
Thank you for choosing Filter Everything PRO.
Please send us the license key via PM so we can check it and provide you with the information on it – https://codecanyon.net/user/fe_support
Please note, that the license key and CodeCanyon purchase keys are two different things. Here is the page with information on how to get the license key – https://filtereverything.pro/resources/license-key-issues/#how_to_get_the_license_key
Best Regards,
- Victor
Just an update – we sent a reply to your email to make sure we don’t publish the site publicly. This is just in case you didn’t check your email.
Best Regards,
- Victor
Hi,we are trying to implement the SEO rules for our filter pages. Our objective is to be able to adjust the h1 on the filtered pages to match the filter, for example, if the service “Cardiology” is selected and the location “Lake Jackson Clinic” is selected, can we have a dynamic page title of “Cardiology specialists near me in Lake Jackson, TX”?
I have tried adding various combinations of SEO rules but am not seeing any changes on the filter pages. I can provide you access to the site if needed.
Hi clshealthinfo
Thank you for choosing Filter Everything PRO.
Please check those pages with explanations of how you can configure and display your SEO Rules:
1) https://filtereverything.pro/resources/all-about-seo/
2) https://filtereverything.pro/resources/seo-rules/
Best Regards,
- Victor
Hi,
I have checked these pages already and went through their instructions, however I still do not see changes on my pages. Could it be a conflict with Divi theme? I’m using the theme builder to build the template for my custom post type.
Also, will setting the title via Yoast take priority?
Sorry, it took a bit to understand but it seems that I was trying to make a single filter to catch all combinations, but if I want to separate the taxonomies then I need to create separate SEO rules, so now I’m at least seeing some changes and making a little progress.
I am now running into an issue with the variables, as mentioned I want to say something like “{speciality} specialists near me in {location}”. However, for some reason both of these variables have the same value so it’s reading like “{speciality} specialists near me in {specialty}”
Hmm, this is a bit weird as they should provide different results.
Can you please send the credentials to the wp-admin dashboard following this document so we can check it?
Best Regards,
- Victor
Just submitted the login info. I tested it on my end and it works. Please let me know if you have any issues.
We have checked the site and added a new SEO Rule to show only when the location and specialist will be chosen, and the issue that causing this is a code here – https://prnt.sc/CNgPMMHtIhaj in is in your child theme functions.php file.
If we commented it out everything is working correctly.
Best Regards,
- Victor
Hi,
Thanks for taking a look. The reason behind adding that code was to make the SEO title and h1 in uppercase format. I was able to make the h1 uppercase with CSS, but the SEO title is still lowercase. Do you know how we could make the SEO title uppercase as well without affecting the SEO rule?
Also, it still doesn’t seem to be working, since the SEO title and h1 are not displaying correctly (https://cls.health/providers/fe_specialty-cardiology/fe_location-pasadena-clinic/
Hi clshealthinfo
1) Go to the filters -> settings -> general tab and in this input – https://prnt.sc/6fgWRrsVuQ0k write down the needed entities that you do not want to force to the lowercase.
Here is an example with the Prodicy -> Attributes how to find the entity name let’s say color attribute – https://prnt.sc/ISrcb-32OTgg
2) Please check those instructions one more time – https://filtereverything.pro/resources/all-about-seo/ at the bottom of the page you will have SEO Troubleshooting, so you can use the code and apply it on the needed hooks of your theme
Best Regards,
- Victor
Hi,
Thanks for your help. It seems to be working now, however I noticed one more issue. Is it possible to create an SEO rule to change the SEO title/h1 when multiple options are selected under the same filter?
For example, what if a user filters out both Cardiology and Dermatology in the filter – then ideally the SEO Title and h1 would be something like “Cardiology, Dermatology Specialists”
No, unfortunately, it is not possible to create SEO Rules when more than one filter term is chosen. It was made like that following good SEO practices.
If your SEO provides a list of “Apple, Samsung, or Acer” and colors “Green, Blue, or Gray” and so on, such sites have a high risk of being marked by the search engines as spamming sites and remove them from the search propositions.
Best Regards,
- Victor
Understood, thank you for the assistance!
Hello! I love the plug in. I have a couple quick questions.
1. Is there a style page to stylize dropdowns and radial buttons? We like this dropdown style (https://demo.filtereverything.pro/genre/epos/)
2. Is there an option for centering a horizontal filter? we are using [fe_widget horizontal=”yes” columns=”3”].
thanks again for all the quick and great help.
Hi wftreptow
1) You can go to the Filters -> Settings -> Experimental and turn on those options – https://prnt.sc/jWKdmWzzTaZT also the styles are inherited from the current theme so they can look differently.
2) Can you please provide more detailed information on what exactly you mean by centering? They are centered, the only thing that can be is that your theme or template for page displaying it not with 100% width and not in the center. Perhaps a link to the page with the issue would help here, so we could check it.
Best Regards,
- Victor
Good Afternoon,
We bought this plugin a couple days ago and wanted to know if it’s possible to receive a refund because it’s not functioning as expected?
It’s not working as expected because we are unable to get it working with the WPBakery Page Builder plugin to display everything.
Thank you
Hi sdpwebmaster
Can you please write a request with a description of what exactly not working from the account where the plugin was purchased? Perhaps we could help you to make it work. Sometimes the plugin settings may look too complicated at the beginning of use. But we’d be more than happy to help you with it.
In general, a refund is possible with the appropriate form from the account where the plugin was purchased. Please note, that the support team is not working with the refunds.
Best Regards,
- Victor
Hi, We have noticed that the filters in our left sidebar are not working. If you click on each one, you can see that the URL in the address bar changes and there is an empty refresh. We have checked the products and they are all correctly associated. You can verify the issue by visiting the following link: https://www.motech-italia.com/prodotti/rivestimenti/. Thank you,
Hi scmatteo
Thank you for choosing Filter Everything PRO.
Hmm, there is some 301 code (moved permanently) – https://prnt.sc/i5eS8nOgooDH are you sure that you are not using any redirections or anything like that on your site that could cause it?
Also, please try to change the URL prefix for this filter to something unique, so it will look something like this “fe_materiale-rivestimento” Please note that we used _ and not – it is important
Best Regards,
- Victor
Hello, is it possible to change the filtering logic from AND to OR? My problem is: I have created a plugin for several warehouses with the name _custom_stock_sc _custom_stock_online _custom_stock_tt
I have created one filter where I have added 3 custom fields. It works beautifully, but the problem is that I want the customer to be able to click on the sc + online + tt warehouse and give him all the results as if no warehouse was clicked. In other words, at the moment, if the customer clicks on the “sc” warehouse and the “tt” warehouse, only the products that are located in both warehouses will be filtered, but I want the products that are located in at least one of these two warehouses to be filtered. so “OR” logic, but only for these actual fields. It is possible to set something like this for categories, but not for these custom fields, because I can’t create a filter, select the “custom field” type and put more than one custom field there.
Hi mareku5
Thank you for your interest in the Filter Everything plugin.
If you are using the PRO version of the plugin, please make a request from the account where the plugin was purchased. So we can help to solve the issue you are facing.
If you are using the Free version of the plugin, please make a request in the forum section here – https://wordpress.org/support/plugin/filter-everything/
Best Regards,
- Victor
I want to buy the PRO version of the plugin, so I’m primarily asking if it’s possible to change the logic to OR for defined custom fields, if so, I’ll buy your plugin and contact you with a solution
If are wondering if it will work with 3 different filters, then the answer is no. You can make one custom field then and put the needed data in it.
Best Regards,
- Victor
No, I create one filter and I have another filter in it as
Categories Price Product size (variants) custom field custom field custom field
It is not possible to put everything into one custom fields filter, as there are 3 different custom fields.
And those custom fields work to filter between other warehouses.
Warehouse A Warehouse B Warehouse C
It is not possible to replace it with one warehouse, as I also physically have 3 warehouses
Unfortunately, there is no such possibility of making certain filters work together, and certain ones work separately and exclude data from others when you choose any filter term in it.
Best Regards,
- Victor
Hi there – love the plugin! I have a very specific usage case that I’m wondering if you can help with…
I’m ideally looking for there to be 3 dropdown menus:
1. Parent category 2. Child category (which will auto update when the parent category is selected) 3. Custom taxonomy
Right now, I have it set up as 3 separate taxonomies but some of the terms listed in the second dropdown aren’t really related to the parent category, which is why I’m hoping there’s a way to implement parent/child categories as dropdowns (rather than checkboxes).
Is this something that can be done? I feel like in theory it should be possible, but struggling to find a combination of settings that would achieve this.
Thank you!
Hi electrickiwi
Theoretically, everything should work fine with the different taxonomies and the “AND” logic on filters. So when you choose in the first filter “car/phone/laptop” in the second one you should see something like “car marks/phone brands/laptop brands” and so on.
Best Regards,
- Victor
Hi Victor,
Thanks for the reply. So yes, technically it does work but the issue that I’ve got is that some of the items which should be considered “children” of the first dropdown aren’t really related.
That’s why I’m wondering if there is a way to convert this so that dropdown 1 shows the parent categories, and dropdown 2 shows the children of the selected parent.
I hope I’m explaining that ok!
Thanks, Ross
Unfortunately, Ross, it won’t work like that. You can’t create two filters in one filter set by the same taxonomy. Of course, you can try it with two filter sets with “AND” logic. But it will work like one filter and in mobile there would be two separate entities, which means they won’t be displayed under one pop-up widget. And there will be an issue with radio buttons and dropdowns.
Best Regards,
- Victor
I’d like to use this plug-in to filter search results. The search results currently return results from multiple custom post types – is it possible to use this plugin to filter search results by post type (e.g. filter results to only show pages, or posts, or any custom post type results?). Thanks
Hi bauholz
Everything depends on the search plugin has compatible algorithms with the filtering plugin. You can create a filter set only for one post type (not multiple at the same time), so filtering can be done only by one post type.
Best Regards,
- Victor
Can the custom field numeric meta key be dynamic based on url? for /tear-trough/, i want the output to be tear-trough for /smootheye/ i want the output to be smootheye
This is because I save prices for different treatments under different custom fields. If possible, I won’t have to make hundreds of filters. Also wondering the same for the sorting functionality.
Thank you!
Hi linus500
Not exactly sure what you mean by the dynamic in the URL. You need to create a filter from a needed meta key. If you have 100 meta keys with numerical data, then you need to create 100 separate filters inside the filter set in order to display them all and filter by their data.
Best Regards,
- Victor
I mean that on the landing page https://hittaklinik.se/behandling/tear-trough/ i want to display pris_tear-trough, and on the page https://hittaklinik.se/behandling/smootheye/ i want to display pris_smootheye. Is it possible without creating a filter set per page?
Yes, you can just create a filter set for each page and in the “Where to filter” specify the needed page. But of course it will requre a new filter set for each page.
Best Regards,
- Victor
Definitely not of course, be nice
But ok, thanks anyway!
This item was featured on CodeCanyon
Elite Author
Contact the Envato Market Help Team
