Hi alphamediaog

Thank you for using Filter Everything PRO.

You have to direct your Filter Set on the page, where you expects to see fitlers. Just select the page in the “Where to filter?” field and filters will appear instead of the error message. Filter Everything PRO is compatible with Elementor.

Hi contact730

Thank you for using Filter Everything PRO.

You have to activate option “Apply button” mode in your Filter Set. And in the dropdowns for the “Alternative location” that will appear, to select page or pages, where Filters widget should be visible.

Fitlering results are always visible on the page, where your posts/products located. But Filters widget can be displayed on this “Alternative location” page.

Cześć grupanappa

Thank you for using the plugin.

In general it is prohibited to publish credentials here in comments, so I have reported your comment.

But they are not needed, I can say that if you have redirect issue, it means one or several URL prefixes you use match to your product slugs. Please try to look on URL prefixes you use in Filters -> Settings -> URL Prefixes and to edit suspicous prefix(es) and this should help you.

Thank you. Regards.

Hello Kai.

You can install Loco translate, translate desired words, save translations in the /wp-content/languages/plugins/ folder and deactivate the Loco translate.

To improve the plugin and to add new features I must to change template files from time to time. I would be glad to add options with specific phrases to the plugin, but after some time I will have another problem – 200-300 options in the plugin Settings and this will be very bad. So average solution is to translate phrases as it is WordPress coding standard.

Thank you. Regards.

Hi Thijmen-Hookit

To change prefixes you can open Filters -> Settings -> URL Prefixes and edit them.

If you have greyed whole filter in the Filter Set like this – https://prnt.sc/NfBWxFTRoPSB it means you created filter with taxonomy that is not related with filtered Post type. Sometimes this happens when you have several Category taxonomies (original Category, Product category, custom Category taxonomy etc) and you selected wrong taxonomy for your filter. For exampe Posts Category for Products.

But if you added single tag to your tag list and it is greyed and shows 0 products in the filter, it means you have to reset filters cache. Please, try to open your site with ?reset_filters_cache=true parameter. For example https://example.com/?reset_filters_cache=true This will reset filters cache.

Thank you. Regards.

Hello bull_

Thank you for purchasing the plugin.

In general to answer on this question I have to test them both. If you will send me zip with copy of that plugin I can install it, test it and let yuo know. Unfortunately I haven’t used this plugin before.

Hello dominiqueramirez

Thank you for using Filter Everything PRO and sorry for the late response.

You had to deactivate license keys before deleted websites, but please send me their domain names and I will deactivate them on the license server side. Optionally you can send them via PM, if you do not want to make them public.

Thank you. Regards.

Hello, I responded in a PM. Thank you for following up on my question.

Hello dominiqueramirez

I’ve deactivated license key on the sites you provided. You can use it for your new sites.

Hello JohnnyQ

I think yes, you have to use this CSS again. If it does not work you can try to add word “body ” (with space) before every such rule because in the last plugin version there were some CSS changes also.

We put the CSS above, with no succes, we still encounter errors.

Hello JohnnyQ

Send me plese link to your site and I will check it. Optionally via PM.

Thank you.

Hello songsmash

Send me please link to the page with the problem. Or screenshot. Optionally in PM. I will check the issue.

Thank you.

Hello dccs52

Thank you for purchasing the plugin and for details you provided.

In general you have to check if filters appear on the end, live page, but not in Page builder edit mode. Although you provided all these details unfortunately I can’t say why filters do not appear and the fastest way is to check it from your /wp-admin. Please, send me credentials to your /wp-admin in accordance with this document I will check it.

Thank you. Regards.

Hello ZoomPoint

Please, look on this demo page for the “On Sale” filter – https://demo.filtereverything.pro/example/by-sale/

And this one for the “Featured” – https://demo.filtereverything.pro/example/by-featured/

They contain explanation, how to create them.

Thank you. Regards.

Sorry, I asked this question 4 days ago, but nobody responded. I see that questions asked yesterday are being responded to by the developer, so I figured I’d ask this again in case my question was missed. Please help me with this issue.

I’ve already answered you here https://codecanyon.net/comments/29328176 Let’s contintue our conversation in that thread.

Hi it1_webrand

Thank you for using the plugin.

In general filtering result pages are custom created pages and other plugins can’t know about them. Thus for the moment you can add them to the sitemap.xml file only manually.

From other side Filter Everything PRO will support own sitemap.xml file in the future updates, but for the moment I can’t say when exactly this will happen. I can notify you here in this comments thread about such update.

Thank you. Regards.

Hello Stefanoosterbaan

Thank you for purchasing the plugin.

By default if you use WordPress theme that contains typical hooks the button that opens filter on mobile should appear automatically. Also you have to activate Pop-up for mobile in Filters -> Settings, but I think you already did it.

If you don’t see the button, you have to insert it manually with shortcode [fe_open_button] – https://filtereverything.pro/resources/shortcodes/#open-button

To force Filters widget to appear on iPad like on mobile devices, please add next code in the functions.php of your active theme:

add_filter( 'wpc_mobile_width', 'my_custom_wpc_mobile_width' );
function my_custom_wpc_mobile_width( $width )
{
    $width = 1180; // new desired breakpoint in px. If you want to use it only in portrait iPad mode please change to 820
    return $width;
}

Hello! I have just solved my problem and wanted to post in case anyone else had the same issue and so support staff didn’t need to waste their time. The posts were still in the “trash” in the posts page, once I deleted them permanently the old filter perimeter was removed.

Thanks!

Hello bkeller8

Thank you for using the plugin.

I’m glad that you were able to solve the problem by yourself. Most of customers are not so experienced

Hello, can you please let us know about this feature? Thanks.

Hello smartwebeu.

Indeed this feature is necessary for the plugin and I have planned to develop it in future plugin updates. But for the moment I can’t say when exactly it will be released. It may take even couple of months.

Any luck with this? Basically Im looking for a way to have the filter set show on a page and multiple posts. I have a recipe site where the listing is built using Wordpress page type and all the recipes are built using Wordpress post type and I want to filter to stay consistent on both the recipe listing and the actual recipe details.

Thanks in advance!

Hello MyBrotherDarryl

Thank you for purchasing the plugin and I’m sorry for the late response.

In general it is possible to display filters on singular posts/page/recipe pages. But you have to know that it expects that you have already displayed resipes loop on such singular pages. Because filtering is process of narrowing of products that you see on the page before filtering. In other words via filtering you can not add new products, but only narrow products list by selected criteria.

Also you have to know that you can add only one Filter Set on one single page. If you want to add the same Filter Set on all singular pages it is possible only via the plugin code modification.

Hey Stepasyuk,

OK thanks for the info. We will investigate modifying the plugin codes and see where that takes us. Thanks!

add_filter(‘wpc_terms_before_display’, ‘wpc_filter_terms_based_on_venduta_meta’, 10, 4); function wpc_filter_terms_based_on_venduta_meta($terms, $filter, $set, $urlManager) { }

$newTerms = [];

foreach ($terms as $term) {
    $args = [
        'post_type' => 'auto',
        'tax_query' => [
            [
                'taxonomy' => $filter['e_name'],
                'field' => 'term_id',
                'terms' => $term->term_id,
            ],
        ],
        'meta_query' => [
            [
                'key' => 'flag_campi_auto_auto_venduta',
                'value' => 'no',
                'compare' => '=',
            ],
        ],
        'posts_per_page' => 1,
        'fields' => 'ids',
    ];
}

$query = new WP_Query($args);

// Se ci sono post "auto" con la meta query "flag_campi_auto_auto_venduta" uguale a "no", aggiungi il termine all'array $newTerms
if ($query->found_posts > 0) {
    $newTerms[] = $term;
}

return $newTerms;

I have added this code and it works perfectly for filters containing taxonomies excluding car sales posts, however the ‘custom field numerical’ filters are no longer displayed, what could I add to this code to exclude custom field numerical?

I would add, it does not work for all custom fields both numeric and textual

For anyone who ran into the problem similar to mine, considering that the developer instead of offering me this very trivial solution preferred to tell me that it was not provided in the support (very strange) you can opt for a similar solution:

// Essential to add the specific application to filters as using it on all filters can cause you problems if you use custom field add_filter(‘wpc_terms_before_display’, ‘wpc_filter_terms_based_on_venduta_meta’, 10, 4); function wpc_filter_terms_based_on_venduta_meta($terms, $filter, $set, $urlManager) { }

// Applica al filtro "brands" o "modelli" 
if ($filter['e_name'] === 'brand' || $filter['e_name'] === 'modello') {
}

$newTerms = [];

foreach ($terms as $term) {
    // [code]
}

return $newTerms;

return $terms;

[code] complete >>>>

add_filter(‘wpc_terms_before_display’, ‘wpc_filter_terms_based_on_venduta_meta’, 10, 4); function wpc_filter_terms_based_on_venduta_meta($terms, $filter, $set, $urlManager) { }

// Applica solo ai filtri "brands" 
   if ($filter['e_name'] === 'brand' || $filter['e_name'] === 'modello') {
}
   return $terms;

$newTerms = [];

foreach ($terms as $term) {
    $args = [
        'post_type' => 'auto',
        'tax_query' => [
            [
               'taxonomy' => $filter['e_name'],
               'field' => 'term_id',
               'terms' => $term->term_id,
           ],
        ],
        'meta_query' => [
            [
               'key' => 'flag_campi_auto_auto_venduta',
                'value' => 'no',
                'compare' => '=',
            ],
        ],
        'posts_per_page' => 1,
        'fields' => 'ids',
    ];
}

$query = new WP_Query($args);

// Se ci sono post "auto" con la meta query "flag_campi_auto_auto_venduta" uguale a "no", aggiungi il termine all'array $newTerms
 if ($query->found_posts > 0) {
     $newTerms[] = $term;
 }

return $newTerms;

Auto, brand, modello, come la meta query sono naturalmente da personalizzare secondo le vostre esigenze

Having said that, having solved the filter problem, can you please help me with the range? You say it works but subsequently when you scroll it doesn’t go. Actually (having now sorted by increasing price) you can see that sa you raise the minimum price to 30,000 you will continue to see cars below that price.

Hi cjramirezb

Thank you for your interest in Filter Everything PRO.

Yes, sure. It allows you to filter any post types including recipes, cars, real estate objects, projects and so on.

Привіт AlexStelmakh

Дякую за інтерес до плагіну Filter Everything PRO.

Надалі продовжу англійською, щоб було зрозуміло іншим користувачам.

In general here is support for PRO version only, but anyway if you want to enable search field in dropdown filter please activate in Filters -> Settings -> Experimental -> Improved dropdowns option and it will appear.