8952 comments found.
I can filter stock quantity for variations? if have in stock show filter checkbox yes and no
Hi mexp
Yes, sure. You can create filter like in this demo - https://demo.filtereverything.pro/example/by-quantity/ and to filter by variations, enable please “Use for variations” checkbox for the filter.thank you, i can setting minimum? example show only product minimum 1=<
mexp
I see two ways to achieve this:
1) To place in your navigation block (in top menu or in sidebar) link with URL that contains this min value. For example – https://demo.filtereverything.pro/example/by-quantity/?min_quantity=1 This will open the page with products that have minimum 1 quantity
2) To modify your Product query that should selects only products that have quantity more than 1
Hi I get „Error! No ‘FilterEverythingFilterFiltersWidget’ widget registered in this installation“ when I try to display my filters.
https://myislandbrac.com/beaches/I’m using Oxygen builder and MetaBox PRO.
I have created custom post type Beach. There is no default archive page. I created the page Beaches and there I have the list of all my beaches.
I used filter like this: Post Type to filter: Beaches Where to filter? Pages > Beaches And what to filter? Beach query (it is the only available option) Not sure what am I doing wrong?
I did a little more research. Do I need to use another plugin like WooSidebars to create my widgets? Like in this video: https://www.youtube.com/watch?v=o08TrfKPvAQ
Hi denissinovcic
I’m not sure what is the reason of such problem. But maybe Oxygen builder requires some additional settings or plugins that provide widgets support.
As I see from your settings you did everything right from filter side settings, but the problem is in Filter Everything widget that does not appear.
I found similar problem with Oxygen builder and it seems you have to change something in Oxygen – https://faqoxy.com/anyone-seen-this-message-from-wordpress-error-no-widget-registered-in-this-i
UPD: it seems we found the same solution of the problem. I hope this was helpful for you.
Hi Stepasyuk, great! I managed to make a functional filter for my events: https://myislandbrac.com/events/
But there is lot of work and twinks that needed to be done to get it to work. Maybe you need to check the whole compatibility with Oxygen Builder.
Regarding my filter. I didn’t manage to remove this dot above my Locations. Can you maybe help me with that?
Also, the chips are not acting as they should. Take a look at this: https://myislandbrac.com/events/_location-donji-humac-or-dracevica-or-gornji-humac-or-lozisca-or-milna-or-mirca-or-pucisca-or-sumartin-or-supetar/_season-autumn-or-summer/_travel_type-eco-friendly-or-luxury-travel-or-traveling-with-friends/
They just pille up horizontally!
Some really weird bugs are going on now. When I update any post, custom post type, page or template some filters stop displaying and i get the message There are no terms yet.
Than I have to go to Filter Sets and re-save any Filter set. It doesn’t even have to be the one that is not displaying and than all filters display normal again.
Hi denissinovcic
All design problems are specific to your site and CSS styles, in general they are not supported issues and you have to solve them by yourself. But as it requires less than 5-10 minutes to fix it, I recommend you to add next CSS in Filters -> Settings -> Experimental -> Custom CSS
li.widget_wpc_filters_widget,
li.wpc-filters-widget-main-wrapper{
list-style: none;
}
li.widget_wpc_chips_widget{
.max-width: 100%;
}
This will solve the problem.
About re-saving Filter Set and strange behavior. I’m not sure how you built your WP_Query with for events and it seems the reason is somewhere in it. I can look on this more deeply and let you know if you provide me credentials to your site in accordance with this document. Make please these preperations and let me know here in this comment thread that you did it.
Thanks Stepasyuk!
The dots are gone now but max-width CSS didn’t help.
I added max-width 100% on that element in the builder also. It didn’t help.
Regarding the strange behavior as I learned so far Beaches are working fine all the time just Attractions and Events have this problem of disappearing filters. What is even stranger, sometimes they are visible on desktop but not on mobile.
I sent you login information via PM
denissinovcic
Thank you for your credentials. I checked your site and realized that now all works fine. Maybe you changed your settings from my last checking.
About CSS – there is small error – one extra dot, that disabled CSS for max-width. Replace it please with this correct CSS:
li.widget_wpc_filters_widget,
li.wpc-filters-widget-main-wrapper{
list-style: none;
}
li.widget_wpc_chips_widget{
max-width: 100%;
}
Hey thanks the CSS is working now but filters are stil disappearing and reappearing every time I update something.
Take a look again. There are no filters on beaches and attractions. I just added your CSS and removed chips from the tempalate and they disappeared.
I think it is some cache compatibility issue with Metabox. For some reason when Filter Everythig calculates how many posts have values in post meta fields you added to filters, these fields are empty and do not contain values.
This may happens after you update any post, page or FIlter Set. I recommend you to reset Filters cache by opening the next URL – https://myislandbrac.com/beaches/?reset_filters_cache=true
I added this task to my schedule and I will check this compatibility issue with Metabox and let you know here in comments. But I”m not sure how soon it will happen.
Ok thanks for the help. So, till then there is no fix for my problem so it is better for me to remove filters from the web?
denissinovcic
I’m not sure what would be best for you. With this reset cache link you can use filters and filtering will work properly. You have only to check after any updates of posts on your site if terms are not empty and reset the cache if they are empty.
But the link is not helping. Click on this link and try to reset cache for events: https://myislandbrac.com/events/?reset_filters_cache=true
Then click on the Events in the main menu you will see empty filters again.
denissinovcic
I checked this again and again I see that all works fine. Maybe you have cache issue on your site or your server?
Hey, sorry but I am not so tehnical. I tried to view with incognito and with cleared cache. Both on my mobile and desktop and I don’t see all filters. On Beaches I see only Beach Type filter and on Events I see Season filter I don’t see Locations and Good for filters.
If I click on any beach type filter than I see Locations and Good for filters.
I don’t understand how can this be my site or my server cache issue?
denissinovcic
Sorry, I checked this again and it seems I found the reason. It’s not typical situatoin, but you use the same meta key for several post types. And this moment generates conflict with inner plugin cache system. I fixed this and now it works fine.
Please, check this.
Nope, it is all still the same! On Attractions Locations and Good for is working fine but on Beaches and Events it does not.
denissinovcic
Hmm, I checked this right now and it works ) Maybe try please to record screen video to show and explain what exactly does not work.
I’m now in incognito viewing Beaches. Location filter says: There are no terms yet. Beach Type filter is showing fine, there is all 4 types: Pebble Beaches, Rocky Beaches, Sand Beaches and Urban Beaches. Good for filter says: There are no terms yet.
If I click on any Beach Type filter the Location and Good for filters show up and I can see all filters fine. Even if I click that same Beach Type filter again to turn filtering off I can see Location and Good for filter.
But if I refresh the page, or click the Beaches link in main menu, Location and Good for filters disapear again and I’m getting “There are no terms yet” message.
I can’t record it right now but I will try to send the recording later today.
denissinovcic
I checked all in the logged in mode. It seems in incognito mode you see the old cached version of pages on your site.
And what about when I clear all my cache and I see the same problem?
Cache may work on your site and on your server simultaneously. You may clear site’s cache, but not server’s cache.
To be sure you see non-cached page there is a trick – just add ?x=a to the page URL and you always see fresh, non-cached page (works on any site) This “URL tail” can be any – ?x=1 or ?abc
To make sure that you see non-cached pages.
Ok, thank you Stepasyuk! It seems its working all fine now. Sorry for the trouble but I hope this will help to make plugin even better.
denissinovcic
No worries, all right. I’m glad that now it works for you. I also fixed this bug for the next plugin update.
Hi!
I have your plugin Filter Everything Pro but I have so many problems with it when using other plugins. It is not compatible with any translating plugin and I have really trouble keeping them working. Could you please check what is wrong? I have Falang plugin for translation and some filters work, some not and even though everything was translated – filters don’t translate. And also had problems with other plugin Visibilty of Categories, but found other solution. But for translation I really need this to work.
Please let me know what can we do.
Regards
Hi navezadoo
Thank you for purchasing the plugin.
Send me please link to the exapmle of the problem and probably some explanations what is wrong. You may provide it with screenshots. Optionally you can send all this via PM if you do not want to make your site link public.
Please reply to my email that I send you yesterday, so I can send you printscreens, as I can’t send them through PM. And as I told the problem is that when translating – this filter doesn’t translate and stops working. When I filter, it shows there is no products found, even though I have product for this exact filter. And on my default (the one that is not translated) language page it works normally.
Hi navezadoo
I’m not sure what exactly translation plugin you mean. Please, let me know about it
The Filter Everything currently was tested and is 100% compatible with WPML and Polynang plugins and this information is provided in the plugin description here on CodeCanyon. Also it should be compatible or partly compatible with other translation plugins but was not tested with them yet.
Hi!! Can you please answer me via email! I can’t explain and send you printscreens through PM on envato market. I am still waiting for your reply from PM I sent you through envato days ago.
Now I am waiting for 3 days already and as I purchased the pro version I would really appreaciate the correct support from you through email. Thanks.
Hi navezadoo
I’m sorry that your expectations were not satisfied, but there are no support by email or other channel except this comments section for the plugin.
In my comment above I asked you about the translation plugin that did not allow you to translate filters, but you still did not answer me about that.
I can check the problem on your site (although I’m not obliged to do this due to support policy rules) if you send me credentials to your /wp-admin in accordance with this support preparations instruction. And if you provide me with details about the problem (screenshots, descriptions etc)
Please, let me know about all details that will allow me to help you.
Hello, I have installed your plugin in a fresh installation of wordpress and the popup function on mobile does not work, I have already tried everything deactivating the plugin, settings and other things and there is no way to make it work, can you help me
Hello gijon
Thank you for purchasing the plugin.
I reccomend you to check this article and read about “Pop-up Filter widget” – https://filtereverything.pro/resources/mobile-devices/
Try please to enable this option and insert Filters Open button with shortcode, if you don’t see this button on mobile devices by default.
If this will not work for you, let me know what exactly does not work for you.
Is it possible to add colour swatches/thumbnail for the colour filter?
Thanks in advance.
Also, is it possible to have a range filter on an attribute. I need to filter a number (price per M2) that isn’t the price.
Hello smashdigital22
Thank you for purchasing the plugin.
1. It is possible but requires extra coding to achive that. If you are PHP developer or you can ask a developer to help you, you can use Filter Term HTML Hooks – https://filtereverything.pro/resources/hooks/#term-html-hooks to achieve that.
Also you can use Template overriding feature to achieve that.
2. For the moment unfortunately no, but this feature will be added in the future updates. I’m not sure it will happen soon, but I will let you know here in this comments thread when it will be ready.
I found a way of doing 2. I have added a variable with a number value and asked the filter to filter this in a range.
Ok, super. I’m glad that you found the solution.
Hi, thanks for the great plugin.
Unfortunately the hierarchy option for the Labels list doesn’t work.
It would be great if the subcategories were displayed slightly indented underneath without folding.
All the best!
Hi mw_voltarii
Thank you for your warm words about the plugin.
The hierarchy option works for the Checkbox view only. It was designed in such way.
Thank you for your advice. I planned to make children terms opened by default in future plugin updates and I will implement this. Not sure if it will happen soon. But I will notify you here in this comments thread about that.
Hi mw_voltarii
I’m glad to inform you that in the latest plugin version 1.7.1 you can make hierarchical filters opened by default. As it is not very popular feature, I did it via hook, but maybe I will add this as separate option in the plugin UI later. Please, see how to make a Hierarchical filter opened by default here – https://gist.github.com/wpserve/aaa55f33224196671883116d6f694e32
Hi Stepasyuk, great thank you!
Cool 
I would be thankful for a review about the plugin here on CodeCanyon – https://codecanyon.net/item/filter-everything-wordpress-woocommerce-filter/reviews/31634508
Thank you in advance!
Is it possible to set collapsible filter items to opened by default using a custom class or code snippet? Thanks
Antiigen for the moment unfortunately it is not possible. I planned to add such option in future updates, but this will not happen soon as there are some more urgent features should be implemented for the plugin.
Hi Antiigen
I’m glad to inform you that in the latest plugin version 1.7.1 you can make filters opened by default. As it is not very popular feature, I did it via hook, but maybe I will add this as separate option in the plugin UI later. Please, see how to make a Foldable filter opened by default here – https://gist.github.com/wpserve/aaa55f33224196671883116d6f694e32
Hello, I’m trying to implement Ajax Search query but it’s not working as it mentioned in the documentation i tried the unique container class and id as well but not working I’m using the listeo theme can you please help me to get this done soon.
Hello marlenejguevara
Thank you for purchasing the plugin.
I can give you advice what exactly value you should specify in the “CSS ID or Class of Posts Container” field to make AJAX working. But you have to provide me with the link to the page, where you have you filtered posts.
Optionally you can send me it via PM or here in comments.
i shared the link privately can you share which CSS ID i have to use? Share it here Please and let me know how to identify . bcz if i need to do it for any other pages. bcz i’m going to implement for few pages
marlenejguevara
Thank your for the link you provied. I checked this and realized that to make AJAX working you have to specify #listeo-listings-container as value for the field “CSS ID or Class of Posts Container” in your Filter Set.
Excellent man god bless you.. btw space between filters are bit long how can change to professional size like in your demo site
marlenejguevara
It seems you did it wrong when you created too many Filter Sets and widgets on your page. You can create single Filter Set with all your filters and space between them is small.
yeah i created separate separate widgets bcz i’m filtering from single category . in the plugin there is no option to select same category for different filter
any solution our problem ?
Hello marlenejguevara
I’m still recommend you to use single Filter Set for your goal, but optionally you can add next CSS to reduce spaces between Filter widgets:
.wpc-filters-widget-main-wrapper .wpc-posts-found{
display: none;
}
#wpc_filters_widget-11 .wpc-filters-widget-main-wrapper .wpc-posts-found{
display: block;
}
You can put it in Filters -> Settings -> Experimental -> Custom CSS
thanks for the support. i could use the single filter but for my scenario plugin is not capable of that. may be i’m wrong. are we able to use same category filter in single filter ? i’m using same category and exclude the unwanted
marlenejguevara
Indeed you can use the same filtering criteria only one time in single Filter Set. But why you splitted all you categories between different Filter Sets if you could use all them in a single Filter Set?
But our scenario is different we are using Single Category and filtering from that. you can see in our page every single filter fields are single category so i can’t do it in one filter
Okay, it is obvious that you know better what do you need.
Hello, I am using your filter plugin on https://susapparel.wtf The plugin works great on my home page which is my main shop page.
However Id like to set up sub category pages. Where for example I have footwear, I want to show the filters there. In the widget the the filters show the proper information however they do not filter the products from the WC grid
Hello justchris86
It means that on your Shop page and on your Product category pages you have different WP_Queries. And this requires different Filter Sets for the Shop page and for Product category pages.
Dear Stepasyuk,
I did a wonderful job with your plugin (with more than a 100 icons instead of classic checkboxes). Successfully switched to Ajax, but noticed that custom shortcodes are not ‘refreshing’ after the AJAX call.
In example, I am echoing .count((flrt_selected_filter_chips($include_reset = false))) on the front and I am wondering if there is any decent way to hook those to your plugin?
(please delete the previous comment, I posted it from my associates account)
Hello gunterqb
Thank you for purchasing the plugin.
It seems you added your shortcode outside from the container that is specified for “CSS ID or Class of Posts Container” value. You should optionally replace content that your shortcode displays inside this container or change the container to wrap the shortcode content.
FYI – all content inside the container specified in “CSS ID or Class of Posts Container” is replacing via AJAX call.
Well yes, but actually no
I did tried with that .class option, but the thing is that the Elementor’s Archive post widget (the one that is being filtered) is in different Section from the shortcodes that returns the chips count and matches count (due to the design req’s).
Assigning the same class to different Elementor sections (columns/elements) for that purpose unfortunately does not works, nor does assigning separate classes to those sections and listing them in the “CSS ID or Class of Posts Container” option.
Placing the shortcodes and the posts within one/same class container works great with the AJAX calls but I cannot change the design :-]
Hmm gunterqb.
Ok, I understood you. In this case I see two possible ways:
1) You can specify common wrapper for “CSS ID or Class of Posts Container” option that contains both – you posts and shortcode content. In this case all content inside will be replaced after AJAX call.
2) You can write your own JavaScript code that replaces desired content outside from the “CSS ID or Class of Posts Container” and attach this event to the jQuery(document).trigger("ready"); event.
Here is some more info about that – https://filtereverything.pro/resources/ajax-related-problems/
What I am trying to do is create an Elementor Products Archive template from the Theme Builder. And I would like to use Filter Everything filters in this template. As per you Elementor demo and your You Tube promotion by WPTUTS. I am not using the sidebar as per Appearance – Customise I cannot work out what I am doing wrong Regards, Andrew
burnagebete
You can send me credentials to your /wp-admin and send me link to the page, where you need to configure filters. I will check it myself and it will be faster to solve the problem.
Make please support preparations and write me comment under current one that you did it.
Support Preparations have been completed, thank you for your help with this, it is much appreciated
burnagebete
Thank you for your credentials. I’m not sure what is your goal, because you have several Product modules on your Shop page. But I added Filter Everything widget to the top of Shop page and it filters products from the first Product module.
Use it please as example and designe your Shop page structure as you need.
Thank you Stepasyuk, I am quite ill at the moment and this is my first ecommerce site. I have been experimenting with the best elementor widget to use for the shop page. Where I am now struggling, is to replicate what you have done to create the filter everything filter on the page and link it to the archive product widget. The Filter Everything widgets are still not available in Elementor. I have tried to copy across the Filter Everything from one Elementor page to another but I then do not know how to link to the Archive Products widget. Also, no doubt I will want to create new Filter Sets and apply them to my pages. I still do not know how to do this. I really appreciate your help. Best regards, Andrew
Ok, burnagebete
The Filters widget you can find in Wordpress section of the Elementor sidebar – https://prnt.sc/5RiYl7Vz85G9
To relate Filter Set with desired Archive products block you have to experiment with different WP_Queries in the “And what to filter?” field of the Filter Set. Please, see example – https://prnt.sc/yr_EOluhB1zn
Hi! First of all thank you very much for the perfect and functional plugin! We use PRO version and and faced such an issue. There is a sale page in the e-shop. We need to make a different sorting of product categories on this particular page. I mean that all archive pages have an alphabetical sorting, but on the sale page we need to display them as in the menu. Will the sorting by ID of terms work or how to activate the manual sorting (it’s inactive now)? And how to display this another filter on the sale page?
Hello Raposa28
Thank you for using the plugin. But support is available only for account that purchased the plugin. Please write your support request from such account or purchase the plugin from current.
I have purchased Pro version and its pretty useful and has cool features. recommended!
But I need some support about few things :
1) I have set Apply mode and hidden some filters while category is not selected. but it takes too much time after ticking one of the category and after 5-6 seconds it will load new filters. First i should easily choose filters and then press Apply/Ok to see the results, but this is too time consuming to choose few filters. kindly check the video or try it yourself at: superstore.ge or view video https://youtu.be/1BpsjQVsqpE
2) as you see in few fields translation issues occur: ka:, how do I fix it?
3) How to put just text search for product titles or descriptions? thank you in advance.
Hello achi1
Thank you for purchasing the plugin and for your warm words about it.
1) You have performance issue and I have to say you that filtering speed depends from next parameters:
- server CPU
- server RAM
- number of posts
- number of filters and terms
- number and quality of plugins you use
- plugin’s code optimizations, internal cache (this was already done for the Filter Everything)
So you can increase filtering process speed if you optimize one o several parameters from the list above.
2) To translate terms you have to use translation functions of your multilanguage plugin and also Filter term name hooks that allow you to modify term names.
3) It seems you have to user WordPress regular search widget that is available on WP admin -> Widgets page.
Alright, one more question about categories. I saw this style on one of your users website: https://sportshop21.ru/katalog-tovarov/kardiotrenazhery/begovye-dorozhki/modeli-elektricheskie-modeli/tip-regulirovki-ugla-mehanicheskaya-ruchnaya How can we make it look and work like that? thank you
achi1
I’m not sure what exactly widget you mean, but if it is this Product categories widget https://prnt.sc/MRX7gh5Te-Kz it is not Filter Everything widget, but regular WooCommerce Product Categories widget.
I have received plugin update notification but I guess its only for Free version ? also, while your plugin is active, I can save variation product changes. For example I tried to save changes in variations ( 14 variation in one product) and when I hit save changes it will just freeze on loading. any ideas?
Hi achi1
Nope, update was for both plugin versions – Free and PRO. If you can not save your variations it seems there is some JavaScript error. You can find more details about the error if you try to save variations in Chrome and after freezing open Chrome console (Right mouse click and select “Inspect”) and open the Console tab in bottom window.
Show me please screenshot with this error message. It should look like this – https://prnt.sc/WT2XtDnwdBQ4
2) here you will see the POST error in console while trying to save variation: https://prnt.sc/qFqMMblp0UVQ
achi1
1) No, you can disable and remove the Free one. But before that please make DB backup for any case. PRO version has no automatically updates, you should receive notification from CodeCanyon about the new version if you subsribed on these type of notifications.
2) HTTP error 400 is Bad request. Maybe the problem is that saving data for too much variations is not allowed by your server configuration. You can try to increase it by changing max_input_vars value in PHP or post_max_size You have to ask your hosting support to help with this.
1) Got it, thanks. 2) Only when your plugin is ON we face that error. otherwise variations work well. BTW we have around 5K products on website.
achi1
I understand your logic, but the reason of such problem could be any other plugin that increcases input vars count. To solve this problem you have to change configuration on your server.
Similar problem was with one of my customers 2 months ago – https://codecanyon.net/author_dashboard?filter=all&term=max_input_vars#comment_27741739 The customer solved it. Your case is the second for 993 PRO and over 4000 Free plugin’s installations. It is obvious that it is not bug of the plugin.
A great plugin. 2 requests if i may. The ability to duplicate filter sets would be nice and the option to add more places to add a filter within the Where to filter? under settings. Specifically targetting multiple categories with the same filter. Other than that its a nice plugin and allot easier to configure than other filters i have used in the past.
Hello matlamont
Thank you for purchasing the plugin and for your advices.
Indeed, these features are cool idea and I planned to add them in future. But still had no time to do that because there are some more important thing should be done for the plugin.
I will do that and notify you here in this comments thread. This will not be soon, but definitely will be.
No problem, i have ran into an issue though where a filter is not working when assigned to any category. I have to use a filter set per category. Not sure if that is a bug or a configuration issue. I’m using DIVI and configured the layout builder to diplay the category pages.
The option “Any Category (for common query across all Category pages)” works only for common (the same) WP Query that presents on all Category pages. You have to experiment with the “And what to filter?” value in dropdown to find what exactly WP_Query works for you.
As option you can select “All archive pages for this Post Type” that also will work on all Product category pages.
Thanks, i’ll give that a try
Hi! We have a strange problem/bug with one of our filter. It don’t know if it could be a conflict with another plugin.
We have a filter set with 3 filters on a page (2 taxonomies and one custom_field).
The problem is that every time we add or update a post, the filter using a custom_field disappears.
The only way to bring this third filter back is to go in that “filter set” and save it again.
Any idea what could cause this problem? We use pods on our site.
I did a lot of trials, changing order, changing de type of filter, recreating the filter.
One thing to note: if I uncheck “Hide empty Filters”, the filter appears, but it is empty. So it looks like Filter everything can’t access the custom_field after some change in the website content (or database). But saving the filter again reestablish a connection?
Hi expomangersante
FYI – filter terms are stored in cache to make filtering work faster. This cache is updated every time when you update any post or product on your site. You also can refresh the cache if you add to your site URL special parameter.
For example your site is example.com In this case URL for refresh the cache will be example.com/?reset_filters_cache=true Add please this parameter to your site URL, open the page and cache will be cleared and your Custom Field filter should work as expected.
Thanks Stepasyuk,
I tried ”?reset_filters_cache=true”.
Yes, the hidden filter is back. So it works when I add your parameter to the URL on the pages that contains the filter.
But I don’t see how to integrate that in the website. Because I need to go on each pages that contains the filter to reload the page using those URL parameters.
There’s also the issue if someone get to our website with a direct link. That link doesn’t contain the cache reset parameter, so it wouldn’t refresh the cache.
The problem seems that the filter automatic update doesn’t work when updating a post. So I’d rather fix that problem.
Otherwise, is there a way (or a hook) to add something in function.php to update the cache automatically after updating a post?
expomangersante
FYI ”?reset_filters_cache=true” should be opened once to reset all filters cache on all pages.
From your words it seems you use a cache plugin that show you cached pages and you do not see correct filter terms after any updates on your site.
In this case my advice is to clear both – filters cache and your cache plugin cache after any changes on your site.
Hello, I ma having issues with my install. I did have it working but randomly it stopped. it does not show up on my shop page as I have assigned it to.
Hello justchris86
It seems you have to check your Filter Set configuration maybe you changed something in your Shop or site settings and current Filter Set config does not match to the Shop page.
Or maybe your Filters widget was removed from the page.
Hi Stepasyuk, everything works well, however I would have one question. I am using drop down filter type. The default value of the filter is ”- select filterName -” I would like to remove the select piece or completely override this text. Is it possible ? Thank you
Hi dvidh2
Thank you for purchasing the plugin.
Yes, sure. It is possible. You can override filter dropdown template in accordance with this article https://filtereverything.pro/resources/templates-overriding/ and change that phrase to your own.
Hello, I am using MyListing theme, which creates custom post types. I let users create their business page and inside those pages I place the Woocommerce [products] shortcode to display their products. 1- is it possible to place filter and sorting widget on all of those pages with the Pro version? how can I select those pages all together? 2- the [products] shortcode is placed inside a tab, might it be a problem for the filter to work correctly? (e.g. the url is myweb.com/page1/#products) 3- can I pass arguments to the filter shortcode in order to display only the products added by a defined user? it is like a post author filter, but I need to pass the author ID as an argument instead of adding a filtering field, otherwise users could display products by author A inside the business page of author B 4- in case the previous question is not possibile but I am able to pre-filter products (based on author ID), will the filter be only populated by terms of the displayed products instead of all the terms of all the products in the catalogue? and subsequently filter only among those pre-filtered products?
Hi, I have tried to add the post filter to my blog page and selected all wp_query in it but still the post filter didn’t work to filter the post in my blog page. It still showing all posts after I checked the category to filter.
https://siriusa.asia/supplementsPlease help. FYI, I am using a customized post list to organize my posts, is it affected the plugin?
Okay, it seems it will be much faster if I check it myself.
Make please support preparations in accordance with this document and let me know here in comments that you did it.
Hi, I have sent you the credentials through email. Kindly check for it. Thank you.
Hi chrislee275
You had to select correct WP_Query for your Posts module. This query is Post query #4 in your case – https://prnt.sc/7KSk6pwLBbtK
Here is working filtering example – https://siriusa.asia/supplements/category-founder/
This item was featured on CodeCanyon
Elite Author
Contact the Envato Market Help Team
