610 comments found.
can someone help me please, if I buy this script then everything would work the same after the installation. or do I have to install something on the server or website?
Hello,
nMon is compatible with most linux hosting environments.
Please see on item’s page the requirements.
https://codecanyon.net/item/nmon-website-service-server-monitoring/20617497Thank You
can we test it on my server if its good work i will pay you directly
Hello,
All sales must go through CodeCanyon, there is no demo version availble which you can install on your server.
You can send me your server details so I can confirm if it work or not. Basically if you are able to install and run the latest version of WordPress you can also run nMon.
Thank You
Support php 7.2 ?
Hello,
Although nMon has not been tested with PHP 7.2, there should not be any problem as long as php mcrypt extenstion is installed.
What about performance? Once I added 15+ servers, I keep getting heavy load. Also, moving the database and files to a new instance, notifications stopped.
I’ve wrote a direct email to you.
Hello,
How many servers you have now? My database is over 1.5 GB and I have not experienced any problems. Also, have you experienced this before moving nMon?
Unfortunately I do not have access to a computer right now to access your system.
After spending hours on this, found that core_users was causing the issue. Combined a clean one with the old database and it worked fine. Feel free to respond to my email and I will send you the .sql export of the problematic one so you can investigate it.
Hello,
I have sent you an email regarding this issue.
Thank you
Added a new server today, no matter what I do, I keep seeing “Never Seen” in admin area.
The same config of the server, exist in my other servers and they are working just fine. Same OS etc.
Any ideas?
In first sight, I though I solved it, since there was an install.sh left there and the agent setup wouldnt replace it, however, ‘Never Seen’ exists still.
What should I provide in a P.M in order for you to give a check?
Ok solved this by removing and readding the server
Hello,
So for the record, there was already an install.sh file on your server, perhaps from another software and you were unable to install until you have deleted the old install.sh ?
Exactly.
Ok, unfortunately it will be unwise to include a delete or overwrite command in the installation command, so this particularities have to be resolved manually.
This script doesnt work well 100%. Ram Usage is completely wrong if you have a dedicated server (or if you have more than 3GB Ram) I have 2 Online dot Net Dedi (one of 8 GB and one of 32 GB) and Ram USage is completely wrong 100%. I have 3 VPS (2 at VEESP, 1 at Netcup) and Ram Usage is 100% Correct. Not a Coincidence, OFC, because im using same LAMP for Every Server/VPS (CentOS 7 + OpenLitespeed)
Waiting a BugFix, Thanks.
Hello,
I have not encountered this issue before, the script was tested with many dedicated servers, but maybe something particular in this case.
Please check my answer to your support request, I will need more info to diagnose this problem.
Thank You
Any update coming soon ?
Hello,
Currently we are working on the windows agent for nMon, but I do not have an ETA for this.
Can you please answer my previous comment, let unanswered?
“What exactly is Occurrences ? Is 1 Occurrency equal to 1 check, when it comes to time delay?”
Hello,
Yes, if you set 1 Occurrence the incident will be triggered immediately, if you set 2 Occurrences the incident will be triggered if the problem occurs 2 times in a row.
Thank You
Whats the time between these checks?
Hello,
Servers report every minute (if you have not changed the frequency for the agent’s cron job).
Checks and Websites are checked every 3 minutes by default by nMon’s cron job (if you have not changed the frequency of the cron job).
Hello,
A SaaS version of nMon will be released at a later date.
Thank You
waiting for that . please try to publish that asap
Hello,
Please note that the SaaS version is still in development and there is no release date available.
Thank You
Hello … I bought the script and it’s great “congratulations” I wanted to know if you can monitor printers, routers … having the system installed outside the network? .. I understand that from within if a pig check is made to any server although windows will be if it is up or is off. I also wanted to know if they plan to set alert levels … for example disk use with three threshold warnig critical …....
Hola..he comprado el script y esta genial “enhorabuena” Quería saber si se pueden monitorizar impresoras, routers…. teniendo instalado el sistema fuera de la red?.. entiendo que desde dentro si se hace un chequeo de pig a cualquier servidor aunque se windows dara si esta up o esta off. Tambien queria saber si tienen pensado poner niveles de alerta… por ejemplo uso de disco con tres umbrales warnig critical…....
Hello,
With checks (ping or tcp service) you can monitor any device that is reachable from the server you have nMon installed.
For servers monitoring is done by an agent installed on the server (only linux servers are supported for now) you can set disk usage, memory, etc. alerts; see the alerting tab of any server for this.
Hi Codeniner,
Like others I think you have a great product in nMon.
There are a few additions I’d be interested in: 1) A dashboard that shows current outages only. (If a check failed it would show up on the dashboard, if the check succeeds again it would disappear off the dashboard. 2) New check: SSL certificate expiries. These would only need to be checked once per day and should warn a week or two before they are due to expire. 3) New check: Talos reputation (formerly SenderBase). See https://www.talosintelligence.com/reputation_center. This is very similar to a blacklist check.
Do you have plans for any of these checks?
I’d also like to say how excited I was to read that you are soon to release a Windows agent!!
Hello,
Thank you for you feedback and your interest in nMon.
Here is a list of upcoming features:
- Incident center, this will be a page showing current unresolved incidents. - SSL certificate check - Windows agent (this will first be released as a beta) - Option to manage DNS Blacklists
Currently I see no API for Talos to fetch the data but I will do more research on this.
Thank you. They sound like great updates.
I am very interested in being a beta tester for the Windows agent. Can I be included as a beta tester?
Hello,
When ready the beta version of the windows agent will be available for everyone.
Hello after a while, disconnects from the servers and shows no reports.
http://prntscr.com/hyulzfHelp in this regard.
Hello,
This is an odd behavior, see if any firewall is blocking communication between monitored servers and nMon, also try to reinstall the agent on a server and see if this solves the issue.
Q1: How to alter the frequency of data sent between server/nmon (servers section)?
Q2: Is servers section working as a monitoring tool aswell? Or do I need to add monitor entries in order to be notified about outages?
Q3: I cant find a ‘check for string’ option. Is this supported, or will be supported in the future? I use a check string through a mysql connect call, in order to check database availability (check this https://ryansechrest.com/2013/11/monitor-database-availability-pingdom/ ). Is there an alternative?
Q4: Any specia requirements for pushover set up? I created a tokenized app, but even if key is applied at nmon, pushover notifications are not being sent at all.
Consider Q3 as resolved. Please do let me know the following:
Q5: Can I rearrange the default percentage and/or the timing of an incident ?I find no option in the backend for this.
Hello,
Q1: nMon agent reports every minute, of you wish to alter this you have to manually modify the cron job on your server. However every minute is the recommended interval.
Q2: Yes, head over to alerting tab of any server, here you have available many alert types for your server, some are added by default while adding the server.
Q4: follow the instructions included in the documentation on how to configure Pushover, if you are not able to get it working please send me access to your installation via a support request. Please note that Pushover app is only free for a few days, you can use Pushbullet which is free and reliable.
Q5: in alerting tab of any server/check/website you can configure for every alert it’s sensitivity, eg. if occurs for x times trigger the alert and notify selected contacts. If this does not answer your question please send more details about this.
Thank you
Q1: I mean the data sent from the server, not the cronjob. I understand that I can change the time of the cron, but isnt the server sending back data using the local installed script (.sh) ?
Q4: Is pushbullet supported in nmon? I see no settings for it. I’ve done what documentation says. Im contacting you through your email, with username/password of the installation so you take a look at it.
Q2, Q3 & Q5 are resolved, thanks.
Hello,
Q1: I am not referring to the cron you set on the server you have installed nMon app. There is a separate cron job installed by the agent on the monitored server, this is created automatically by the agent installer on the monitored server.
Q4: For pushbullet you just add your pushbullet account key in alerting- contacts, no other config is required.
Q1: how to edit this cronjob? where’s this stored? cant find it via crontab -e
Q4: Ok, solved.
A new, informational question: What exactly is Occurrences ? Is 1 Occurrency equal to 1 check, when it comes to time delay?
And another informational one: How’s ‘Around the world’ being populated? I see no field for adding server’s location. Is it geo-based recognized automatically? Beucase I see some EU servers that are assigned to America there.
Hello,
Location is determined based on server’s IP address, this will change in the next update and it will allow to set custom location.
Ok thanks. Please answer to this question that left unanswered aswell: What exactly is Occurrences ? Is 1 Occurrency equal to 1 check, when it comes to time delay?
Have you thought about creating a check that besides knowing if a web is online can be validated in it?
Hello,
Please send more info, what to validate?
Thank You
lo que quiero saber ya que quiero comprar el script es si tienen pensado hacer un chequeo que compruebe si una web con usuario y contraseña hace login correctamente
what I want to know since I want to buy the script is if they plan to do a check to check if a website with username and password is correctly registered
what is approximate date to implement the windows agent? Thanks
Hello,
A rough estimate will be end of January beginning on February.
All of my ICMP (Ping) checks to my static IP’s are showing as Offline, even though if i test from other sites like http://pingtool.org/ or https://mxtoolbox.com/ I am able to ping them fine.. Please help.
Hello,
PHP exec must be enabled on your hosting server in order to run PING checks.
I purchased this script a few days ago after one of the website I manage was down for 2 days before I noticed. With the help of this script, I don’t expect that to ever happen again. My only question (or perhaps feature request) is does the script use status codes to determine if the website is down? If so, in an update could we get error codes listed next to the status. Also the system is considering pages responding with 500 error code as Online, is this a glitch?
Hello,
Yes nMon uses status code to determine the status of a Website, what you are experiencing is not normal behavior and I will ask that you send me the website url so I can check.
And please do not forget that after you add new asset to monitor, you should wait for a few minutes so that the first data comes in and is processed.
Any way to hide the pages from the public? Right now it is easy to decipher the syntax (nmon/?route=publicpage&id=1). I do not want all my checks exposed. Any tricks?
Hello,
Pages are designed to be for public use and accessed without any form of authentication, only select the monitors that you want to display.
Nonetheless your idea is good and will consider adding keys instead of id if someone wishes to have this pages only for internal use.
Thank You
Thank you. That will be awesome.
Hi can your script monitor mysql databases just to check it is up and live ?
Hello,
It can check if a process is running, therefore it can check if mysql is running.
Please note that this has been added in version 1.1 and the demo site is still at 1.0.
Thank You
How long does it take to start generating logs? I have completed the setup and added some servers, websites and checks but last checked still shows never for two hours now.
Hello,
Have you set the cron job? Please see the included documentation on how to do this.
Thank You
Ok I made a mistake in the cron that has been corrected, I am now getting reports. Problem now is that the Servers I have added still shows as “Never Seen” even though I am getting logs from Websites and Checks. What could that be?
Hello,
Have you installed the nMon agent on your server? If you are still experiencing problems please open a support request and send access to your installation so we can check.
Thank You
