7851 comments found.
Thanks for the new version actually biolink can’t be disabled even disabled they still accessible
Hey there,
Thank you for the bug report. I have submitted already a fix for this and you can download it, and replace the app/ folder completely.
Regards,
AltumCode.
Hey, I did the update according to the instructions and when I go to my link the first time it’s ok but the second time it goes to the main page, then I have to delete the folder in the cache and one time is ok but the second time it goes to the main page again and again and again
Hey,
Please redownload the archive from codecanyon and replace the app/ folder completely, should be good to go!
Regards,
AltumCode.
Awesome update. Thanks!
Do I implement any features to easily translate to another language?
Hello,
What features do you want to implement?
Regards,
AltumCode.
QR code link not work in the new update 7.0
And 2. I noticed all my Biolinks when I click the first time, it loads correctly. When I clicked the second time, it goes to the main website.
Hello,
Thank you for letting me know.
Please redownload the archive in about 10-20 minutes and simply replace the app/controllers/l/Link.php file.
Regards,
AltumCode.
Hello,
Please refer to the other already mentioned comments: https://codecanyon.net/comments/26507017
Regards,
AltumCode.
how to make the updates, I did not find a tutorial that is clarified.
Hey,
Please download the product, you will see a clear folder inside that says “How to update”.
Regards,
AltumCode.
I am in version 5.1.0 and I need to update to current, will I have to update from version to version, on account of the database? don’t you have a smarter way to do this?
Hello there,
Simply copying and pasting the files (the app/, themes/ and vendor/ folders, only once) and the mysql queries from 5.1.0 until the latest version takes maximum 5-10 minutes.
Regards,
AltumCode.
hello, I have a problem with statistics.
When I create a link, it is directing to the destination, without redirecting the biolink, and it is not recording in the statistics, the link works but does not record any clicks. Is there any configuration for this? It is a bug?
Hey there,
There aren’t any known bugs regarding this matter. Do you have a fresh installation or an updated one?
Regards,
AltumCode.
the installation was made by you last week.
Can you please send me login credentials so that I can check?
Shure, sent by email!
Thanks
I just tested on your site and statistics are showing and tracking properly..
Is it possible to allow registration ONLY via Facebook login?
Hey,
Nope, not possible with the current setup, only if you do changes to the code to allow only Fb login.
Regards,
AltumCode.
Ok, thanks. Too many people exploiting startups creating multiple free accounts with all kinds of disposable e-mails. Hoping Fb ONLY would help. 
When I try to add new links (Add a new block) it shows the options but I am not able to select any of them. They are unclickable.
Update: I figured it out thank you.
Hi, I got error after i follow all step installation after they finish has showing me user and pass admin to login to panel bu when i click on login they show this error msg : Not Found The requested URL was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
kindly i need help now i want to start using my script now. thanks
Hello there,
Thank you for the comment and purchasing,
Please check the documentation FAQ, as the answer is already in there: http://phpbiolinks.com/docs#faq
Regards,
AltumCode.
Hi AltumCode
Need your assistance please.
My installation is placed at domain1.com and I bought another domain for the multiple url. (coz FB is giving me a hardtime with the existing domain).
Under cpanel, I have update the A file pointing to the domain IP and CNAME pointing to the existing domain.
But, the biolink pages goes to 404 page.
Help! Help!
Hello there, fastbizmom
Wish you’re doing good!
Did you add your extra domain, as an addon domain properly through your cpanel and pointed that tot he original installation?
Regards,
AltumCode.
Hihi AltumCode – definitely.
1. I added the additional domain to the same cpanel where the existing installation is setup.
2. I am using cloudflare, so the additional domain is also added to cloudflare.
3. Lastly I update the domain to the admin dashboard and add the A file and CNAME accordingly.
4. I was very happy to see in the biolink the additional domain (that means people can use whichever domain name).
5. I tried to change an existing biolink ….and it goes to 404. 
1 – Can you please show me some screenshots? (privately)
5 – Can you please send me the credentials (privately) through the support contact form and tell me the steps to reproduce the problem?
Regards,
AltumCode.
ok….will do shortly. Thanks AltumCode.
I wanna stop crying first! ;p
Hi AltumCode – Kindly refer to your email.
Thank you in advance.
Hi. This project is good. I have two questions for you. 1- What types of ads can be added to BioLink? (Video, banner, etc.) 2- Can users pay with a credit card when purchasing a plan?
Thnx.
Hello, alfacan
Thank you!
1 – You can add any types of ads in the Ads field from the admin panel.
2 – Yes, you have the Stripe integration + Paypal integration (only available for extended licenses).
Regards,
AltumCode.
Hi Fabian, adding custom domains need also the nameservers to be updated; please double confirm (as only pointing the custom domain to the main domain is not working and the custom domain still will show error).
If it`s not necessary to update the namservers i would really appreciate a see how if you can show me a tuto (i tried many times with different hosts and all their support said i have also to update nameservers).
Hello there, aissat
This can completely depend on the use case.
If a domain uses its default nameservers and only points an A record / Cname record to an outside source, it is possible that it may not work (haven’t tested this particular case), although it should work with simply pointing an A record to the proper IP of your own host (where your phpbiolinks installation is).
Regards,
AltumCode.
Leap Link URL
Some users put the same BioLink URL in Leap Link URL by mistake, in the result page getting below error.
This page isn’t working right, redirected you too many times. Could you please restrict the same BioLink URL in Leap Link URL?
Socials
In social Many new users are putting full link instead of (username, ID, Page name)
For example
https://twitter.com/ (instead of username, they are putting full link) in result getting final link like this https://twitter.com/https://twitter.com/jonseenaalthough instructions mention clearly put (username, ID, Page name) but still users are doing these mistakes.
Is it possible website to show an error message when the user puts a full link or on putting the full link code remove the full link and take only social (username, ID, Page name)?
Greatly appreciated it if you can provide any solution for these mistakes in upcoming updates?
Hey,
Thank you for the comment!
The leap link autofill on chrome should be fixed in the upcoming update!
Also, regarding the socials, it is already clearly showing that you must enter your username.. it is also showing a prefix of https://twitter.com/ to give the user even more context.. https://we.tl/t-XCmft63ofO
Regards,
AltumCode.
Hello,
First, thanks a lot for the great work, it’s a real pleasure to work with such a great quality code!
I’m facing an issue with punycode domain names. The problem is that it only works (creating links and Biolink) if the domain name is added in puny code (xn—XXXXX.com). But I’d like the user to see the ASCII domain name. Could you please let me know how to manage it (display as ASCII while using puny code in the background) and which files in the product are related to that?
Thanks a lot!
Hey hey!
Thank you as well, I’m glad you like phpBiolinks!
Can you please send me some examples via email, from the contact form on my profile page?
I will try to point you in the right direction!
Regards,
AltumCode.
Hello, Custom landing page url is not working, when i entering custom landing page url like www.domainname.com/lp and when i visit www.domainname.com it redirects to www.domainname.com/lp that is ok but when i login to website then instead of going to www.domainname.com/dashboard it goes back to custom url means to www.domainname.com/lp can you tell me how to resolve it through code?
Hello,
Please post the comment from the account that you have purchased the code with.
Regards,
AltumCode.
Hi, is code for regular and extended licence the same? First i want to buy regular and make some modification. Will be problem if i upgrade licence later?
Hey,
That depends on what modifications are you going to do. But yes, you would be able to upgrade later on. Keep in mind, parts from the extended license are missing in the Regular ones.
Regards,
AltumCode.
Ok thank you. So better to buy extended to be sure.
Hey!
Yes, if you plan to see and understand the whole structure when doing custom modifications, yes.
Hello I want to rest my code for a new domain Thank you
Hello,
You’re good to go, thank you for the notice!
Regards,
AltumCode.
@jaycrane1 contact me if you can, I’m working on the same product you’re working on. I’m on south america so no competition, and we can change notes.
The latest version I use is 4.1.0, how can I update it to the latest 6.1.0 without losing user data and statistics?
Hey there, Charliex
You need to follow all the How to update notes, properly, in order to do that. Make sure to backup everything first!
I also offer updating services, so I would be able to help you with this for a fee if you want.
Regards,
AltumCode.
I need the Old Versions from 4.1.0 to be able to do what you tell me
