234 comments found.
How can the system be configured to calculate binary bonuses exclusively based on the volume of the weaker leg (smaller side) in the binary structure, instead of summing up the total income? Currently, the system calculates the total income through the referral system, but adjustments are needed to ensure the binary bonus is correctly calculated based solely on the weaker leg’s volume.
?
as like as others MLM, there are referral and matching bonus and those working fine
Do you understand the essence of the question? Calculate referral income based on the volume of the weaker leg (smaller side) in a binary structure, instead of summing the total income?
You can configure that from the admin panel: https://prnt.sc/AMvSme0fp9ho
Ok
Okay sir 
this app nothing CHART TREE’s downline and upline ? BINARY or TRINARY ?
BINARY
what are pins in mlm lab ?
Please check the reply on your other thread
Hello, Is it just a binary system or can it also be simple linear? Can commissions be uploaded with a csv?
Is it just a binary system and there is no option to upload with csv.
Can it be done linearly? How much can it cost? And also how much can it cost to upload commissions in an Excel spreadsheet?
Hi,
We are selling ready codes here and you will get the same files as the demo has. Now, if you want to add any features there or wanna change anything then you may make those done from your end. unless you may hire any experts or you may hire us to make those done. all additional works under additional payments.
If you are interested then Please open a customization enquiry here: https://viserlab.com/support
Our Technical team will assist you.
Regards
in this i am able to set First Fair Matching of 2:1 or 1:2 after that 1:1
No.
How many types of commissions or rewards do you have in the system? I can see 1. referral bonus, 2. binary commission only, do you have matching commission, etc?
1. yes
2. yes there are.
3. there are matching commissions too
Hello friend, I have a problem here. This system is just for a Binary Network and I bouth it thinking that I could change the settings to as I wish. I didn’t note it was a fixed config.
My MLM model is different, I need the person can registre 23 direct persons and any of the directs can have just 23 below them and it ends there.
The user rank is counted on how many directs the user have and how many “childs” his directs have below them.
I have tried to send a ticket using the suport link wich comes with the documents but the link appears to be off.
So, I just watch your portfloio right now and I see that you have another system (MatrixLab) and I enter it and note that this one is the system that I had to buy, not this one.
Please, please, I don’t have more money to buy the other and it’s for a client. I already have made the donwload and I think there exist a rule of refound. But, I don’t want a refuond, I really don’t have use for this one, I need the (MatrixLab).
Best Regards.
This is Binary and what is written everywhere.
Hello. And your answer is just that? I am asking for help friend. Almost you could answer me if you coldn’t help. But, I really apreciate if you can help me.
Hello. And your answer is only that? I am asking for help friend. At least you could answer me if you can help or not. But, I really need your help and patiance.
You can check my history. You can see that I purchased MLMLab and on the same day or next day (I really don’t remember if I installed on 11th or 12th) I installed and activateed it. I translated it during the sathurday day and next day (sunday) I went to change the settings and discovered this little big problem. So I came here to ask for your help.
Pls, I really need to change this for MatrixLab, It’s have been just 3 days since I puchased I I spent just 2 days to see my error.
I know it’s my faulth, not yours.
To keep our support system efficient and seamless and to keep your data safe and secure, we’ve developed an easy-to-use support portal for you.
Please open a support ticket here: https://viserlab.com/support
Our Technical team will assist you.
Regards
how can we test user panel? any demo credentials?
fyi, i tried signup but it ask for referral username
Hello,
Admin access is given there. Please just register and test the user end
We want to assure you that we will provide the product exactly as described and demonstrated in the demo. We recommend checking the demo again and carefully reviewing the product description to ensure that it aligns with your specific requirements or needs. This will help you to cross-match the features and functionalities that are available within the system.
You can request a private demo to explore more. The results you obtain from private demo will be the same as if you purchase and install it on your own website.
Hi, I don’t have the domain ready yet and want to try it out on my test domain, would it be okay to activate it there and then activate it on the main host?
yes you can do it
I’ve activated it on the smartblock.com but did it poorly and reinstalled it. Now when I activate it on the same domain it says “The system detects that you are trying to activate the product on an unauthorized domain or IP.” even tho I activated previous version like 5 minutes ago on the same domain. I’ve deleted previous version and installed new one, now waiting for the approval, thanks
hi,
if you face any issues, please open a support ticket from the URL given, our technical team will assist you: https://viserlab.com/support
I can’t enter it on any network as it says
“This site can’t provide a secure connection viserlab.com sent an invalid response. ERR_SSL_PROTOCOL_ERROR”
Unable to get you sir, will you please share screenshot of the error ?
I can’t send screenshots there. I mean I cannot go to your website as it always throws error of wrong SSL, can we deal with it here? I can send purchase code or something, I just need to deal with it quickly. Allow abbigeilwf@outlook.com second activation on the same domain, I cannot use it. My first activation was not working, no pages were opening for some reason so I deleted it and started from scratch.
There is no SSL error at all, will you please share the error screenshot here?
I mean, well, okay, I just don’t see how it’s relevant – https://ibb.co/jWnqn47
I did it through phone tho, I’ve created ticket but I hope you can reply to me there as well
Chrome on Windows? there is no such issue. Please make sure you are not using a proxy! unless everything is perfect here at viserlab.com
If I want to convert this in helping mlm plan then it possible are you able to convert this in my plan ..?
Hi,
We are selling ready codes here and you will get the same files as the demo has. Now, if you want to add any features there or wanna change anything then you may make those done from your end. unless you may hire any experts or you may hire us to make those done. all additional works under additional payments.
If you are interested then Please open a customization enquiry here: https://viserlab.com/support
Our Technical team will assist you.
Regards
Hello, is it possible to limit the levels that will get comission (ancessor tree)? Also, what are the PINs? Thank you
the tree commission is up to the root, so no limits. e-PIN is a way to deposit the amount within the system.
I think you didnt get me. It seems that it is NOT possible to limit. For example, allow a user to have only two levels down so that it will not be a long tail.
I am checking the demo and there are parts that seem more difficult to uinderstand. Do you have docs or do we get around it?
Thank you
For example, allow a user to have only two levels down so that it will not be a long tail.
- There is nothing like that.
-
This is traditional Binary MLM
I was reading more about and it turns out that what I am looking for is the Matrix MLM and you have an app for that as well. I think it would help if the title name for this product here included “Bynary” and some information about the differences were providfed and also linked to you other products.
You didnt realized that the Matriz is what I am looking for even though I mentioned that I wanted to lmit the levels. Not sure how you missed that, but anyways, I found out because I went after it…most people wont have such work. This is just a feedback for imrpovement, ok?
Hello,
Thanks for your suggestion, I will convey your message to our R&D team.
We want to assure you that we will provide the product exactly as described and demonstrated in the demo. We recommend checking the demo again and carefully reviewing the product description to ensure that it aligns with your specific requirements or needs. This will help you to cross-match the features and functionalities that are available within the system.
You can request a private demo to explore more. The results you obtain from private demo will be the same as if you purchase and install it on your own website.
Additionally, We can do as you want for an additional charge. Please open a support ticket from the URL given, our technical team will assist you: https://viserlab.com/support
a role with Distributor needed. Do you plan to add this feature?
Hi,
We are selling ready codes here and you will get the same files as the demo has. Now, if you want to add any features there or wanna change anything then you may make those done from your end. unless you may hire any experts or you may hire us to make those done. all additional works under additional payments.
If you are interested then Please open a customization enquiry here: https://viserlab.com/support
Our Technical team will assist you.
Regards
Hi Team, do u have any detail documentation how to use script
Unfortunately we do not have such tutorial kinda document 
Do u have plan to add auto assign of usernames..?
I have done customisation but it doesn’t supports the latest updates so can u help me out
Hello,
Thank you for contacting us. All of our items comes with full source code. so you can modify as you want. you can add new features, apis, designs or anythings you want.
Please let us know if you need any more help.
Regards
I have already created Ticket#238574
Hi,
Sorry for the late answer. we was on Internet blackout for last 5 days.
Our Technical team will assist you.
Regards
when user login a account then he go to (my tree) option then show a 401 error
Hi,
Sorry for the late answer. we was on Internet blackout for last 5 days.
Please open a support ticket here: https://viserlab.com/support
Our Technical team will assist you.
Regards
I don’t see any update policy. Are they lifetime or limited? It’s essential for you to clarify something so fundamental.
what kinds of updates you are looking for ? pls let me know details
What version of Laravel is? You have social media login/register feature?
Laravel 9 and support php 8.x
how binary commission work i need some demo video or guidence if im satisfied i will purchase
what we have are there already, pls check demo, if you happy then purchase
I am installing the script and I need your help, because, although the hosting is not cPanel, it is Hostinger and meets all the server requirements for the installation according to their documentation provided. However, I only get a 403 error and I can’t install.
Thank you in advance for any help you can give me.
I have already created Ticket #894253
pls check responses there
