Discussion on iMapper - Wordpress Image Mapper / Pinner, Add Interactive Pins to Your Photos, Select Image and Pin

ShindiriStudio

ShindiriStudio supports this item

Supported

360 comments found.

Can I use a pulsing gif dot for the marker?

Hi,

GIF is supported in iMapper.

Best regards,
ShindiriStudio

Hi, presale question. Is there any way to ad custom hover areas?, like a flat plan and one area is teh living, the other the kitchen, ...

Thank’s

Hi,

You can set custom fields as pins for an image.

Please check our demo:

http://www.shindiristudio.com/wpms/wp1/area-pin/ or you can also use custom pins: http://www.shindiristudio.com/wpms/wp1/

Best regards,
ShindiriStudio

Hi.

I had seen the demo before writing but i’m afraid i’m still not sure if it’s possible to do what i need. I need a background image of a floor plan and over it one pin should be the living area, other one the kitchen area, other the bedroom, etc.

Of course each pin area in the exact place over the background, so you only notice it one you hover or click.
In the demo i see circles, o circles with a plus symbol, the same shape or icon in the image, but i don't know if it's possible what i'd need

thank’s

Hi! I want to buy this plugin but have 2 questions:

1.- What number of pins can I introduce an each image? Only one type, I know, but can I mark 10 parts, for example?

2.- Can I include a url/link in opened pins to access to a new page of my web?

Regards!!

Hi,

Thank you for purchasing our plugin!

1. The number of pins is not limited, but we strongly advise not to overrun the image with pins, 10-15 pins were always a golden middle.

2. Of course, you have in the backend options the possibility to set any link to a click or hover of a pin.

Best regards,
ShindiriStudio

Hi ShindiriStudio :)

I just discovered this fantastic plugin and I have a question.

Can I add only an image in opened pin from flickr or wordpress multimedia gallery?

Thanks a lot!

Hi,

In the pin open tab you can set HTML, so it should be possible to include it.

Best regards,
ShindiriStudio

i have a problem when i enable the plugin i am using avada template when i enable the plugin .. the image carousel is hidden on the mobile .. work normally on the desktop website : http://bit.ly/2hdbRfz

Hi,

Please contact us on support@shindiristudio.com the support team can take over and help you with your issue.

Thank you

Regards,
ShindiriStudio

i have a problem and sent you email from two weaks and no solution !!!!! bad support !!

Hello,

We are sorry that you had to wait for the support but we were on a holiday break. We are back in the office starting today and we will get your issue solved right away.

Kind regards,
Shindiri Studio

i have a problem and sent you email from three weeks and no solution !!!!! bad support !!

Hello,

We are sorry that you had to wait for the support but we were on a holiday break. We are back in the office starting today and we will get your issue solved right away.

Kind regards,
Shindiri Studio

Hello,

Pre-sale question. Can the custom pins have html text included with the pin, so the user can change the text? See this screenshot: https://www.screencast.com/t/mjzQMfnmdf

Hello,

Unfortunately, this is not possible, only images can act as pins. What you can do is to create a different image for every pin. And that image can be text that you require. In that case the text would be present on the mapper except it wouldn’t be a text, it would be an image.

Kind regards,
Shindiri Studio

Hi, I am working with your plugin. I have chosen Pinclick action: link; also Pin Hover action: hover; the link works well, but hover does not show any text I write in the box called “pin content”. I thought it was possible to do, and my client is asking me to get this behaviour. Is anything wrong, can you explain me how to do it or solve it. Thank you.

Hello,

This is one of the basic functionalities of iMapper. When you open an edit box for a specific pin you will find “Pin Hover Action” dropdown. It is set to “Default”. You need to change this to “Content” and it will display content on hover.

Kind regards,
Shindiri Studio

hi there, can you please provide me with some custom css to change the font family for your plugin, in our template? Thank you!

Hello,

We will be happy to assist you. Can you please post your question on our support forum with your purchase code?

Kind regards,
Shindiri Studio

This supported by latest wordpress version 4.7.2

Hi,

Imapper is still not tested for version 4.7.2 we will do it asap and adapt if there is need for it. We had no complains so far by any of our users.

Regards,

Hi! This is a pre-sale question. In your description text and in your demo, you indicate that content can be displayed below the content.

Could content be displayed to the left or right of the content?

Also, I see that the plugin has not been updated since the middle of 2016. This plugin is still active, correct?

Thank you,

- Ana

Hello Ana,

Yes, the plugin is active and we are preparing a major update with tons of new options and bug fixes.
To answer your question: You can set the content under the image but unfortunately you cannot set it to left or right. This option looks like something that we want iMapper to do and we will definitely implement it in one of our next updates. Thank you for the idea and we hope that you will return once we release the update.

Kind regards,
Shindiri Studio

Hi, is it possible to direct a link pin to the same window instead of blank?

Hello,

Can you please reach out to our support team. They will help you out with this. You can contact them at support@shindiristudio.com

Kind regards,
Shindiri Studio

done! thank you very much

Hi,

Thank you!

If you are satisfied with the support you got please do not forget to rate us and our product! :)

We will be more than happy to ensure that every time you contact us we will be there to help!

Best of luck,
Shindiri Studio

Hi, I’m intested on buyng your plugin but I’ve 2 questions.

- Does it works with latests versions of Wordpress? Is the plugin updated? - If the form is used by mobile phone it is possible to get the address info from geolocalisation of the mobile? - If the form is used by mobile phone It is possible to add pictures taken by the phone?

The projetc we have in mind is to create a map only for user-generated content. Users will use mobile phone to take pictures and send them to us via web, we will include the page also inside an app. We will need only to moderate it. If it’s ok we will publish it.

The form then should find the GPS location and open the camera of the phone or search pictures inside the galleries.

Is it possible with your plugin?

Thanks,

Nicoclò

Hello,

As interesting as they seam, the features that you requested are really beyond iMapper. They are more for some custom work specifically for your product.

Kind regards,
Shindiri Studio

I sent a message to support with no response. Very fustrating. Plugin doesn’t work on mobile!

Hi,

Please give us your ticket number to check out the issue?

Thank you

Regards,
Shindiri Studio Team

Hello—I have a pre-sales question: Here’s the scenario I’m trying to accommodate for:

  • Custom Posts will be uploaded to our site
  • Each Post will contain several image attachments and some text
  • Several reviewers will need to annotate each image by dragging their respective icon onto each image and adding text to their icons. The icon will act as an identifier for the author on each image.
  • The reviewers will need to do this from the Post interface—not the media Library
  • After each reviewer has finished annotating the images on a post, they will save it and then all annotations (different icons and text annotations) will be visible on the front end of each post.

Is this possible with your plugin? I’m a developer, so I can customize if need. Thank You.

Hi,

Unfortunately, this kind of features are not possible to do in the current setup of our plugin.

Of course we need to think it over to see if such things could be done with our plugin, and custimize it to do it, but we are not optimistic.

Regards,
Shindiri Studio

Hi there, very nice plugin, I was looking for something like that since a while. But I got a problem, it seems tht this plugin don’t look to be responsive…

Hi,

What is making you problems? Please contact our support forum via support.shindiristudio.com or directly over email: support@shindiristudio.com

Our support guys will take from there and help you.

Regards
Shindiri Studio

Hi, I have set my title font size to 15px, but I need it to be 13px for iPhone. How do I change it? Thanks!

Hi,

Please contact our support guys via our support system: support.shindiristudio.com or directly via email: support@shindiristudio.com

Regards,
Shindiri Studio

Hello, I have theme and it’s background settings can be done in module. I want to use imapper to have pins on background. Is there a way to set pins on an image and use it as background image in a theme?

(Or maybe in full page image slider)

Hi,

You can set the shortcode as the background for a section. Or set it in a slider.

Regards,
Shindiri Studio

Pre-sale question,

I have seen many comments/questions/complaints about mobile and responsiveness. I resized the screen (on desktop) on your live demo and there are some hiccups but overall in seems to be 80% ok. Font is too small and pins block the whole image so you cant click back. But only on some.

So I tried it also on my phone and when I clicked on the live preview it lead me to your website but it didn´t turn on the mobile version. So I couldn´t even test it on my phone.

Can you show me a website where I can see the responsiveness live on my phone to verify that everything works?

Hi,

Here is the link to a iMapper demo site:

http://www.shindiristudio.com/wpms/wp1/

Regards,
Shindiri Studio

This is a presale question. I am very interested buying your plugin (it’s really awesome). However, I have the same concerns as other users who commented above. Based on your demo – http://www.shindiristudio.com/wpms/wp1/ – it seems like it is not responsive? Or has this been fixed?

Please advise. Very excited about implementing this on our website. Many thanks!

Hi,

Thank you for your interest. We are working on resolving the bugs that are happening to some users.

The responsiveness is one of the challenges that we are tackling right now.

But we are still recommending the plugin, as it has awesome functionality.

Regards,
Shindiri Studio

by
by
by
by
by
by